Study on Stiffness and Conditioning Effects of CMP Pad Based on Physical Die-Level CMP Model
نویسندگان
چکیده
Article is made available in accordance with the publisher's policy and may be subject to US copyright law. Please refer to the publisher's site for terms of use. The MIT Faculty has made this article openly available. Please share how this access benefits you. Your story matters.
منابع مشابه
Modeling Dielectric Erosion in Multi-Step Copper Chemical-Mechanical Polishing
A formidable challenge in the present multi-step Cu CMP process, employed in the ultra-large-scale integration (ULSI) technology, is the control of wafer surface non-uniformity, which primarily is due to dielectric erosion and Cu dishing. In contrast with the earlier experimental and semi-theoretical investigations, a systematic way of characterizing and modeling dielectric erosion in both sing...
متن کاملPad conditioning in chemical mechanical polishing: a conditioning density distribution model to predict pad surface shape
Abstract: Diamond disc pad conditioning is traditionally employed to restore pad planarity and surface roughness in chemical mechanical polishing (or planarisation) (CMP). In this paper, a conditioning density distribution model is developed to predict the pad surface shape resulted from the diamond disc conditioning in CMP. A kinematic study is carried out to calculate and simulate the diamond...
متن کاملIn Situ Investigation of Slurry Flow Fields during CMP
The objective of this work is to obtain in situ slurry fluid flow data during the chemical mechanical planarization CMP process. Slurry flow affects the material removal processes, the creation of defects, and consumable use during CMP, and therefore impacts the cost and quality of polishing. Wafer-scale flow visualization using seeded slurry was accomplished for a variable applied load 0.3–2.5...
متن کاملMechanisms of Material Removal in the Cmp Process
The Chemical Mechanical Polishing (CMP) process is now widely employed in the manufacture of Ultra-Large-Scale Integrated (ULSI) circuits. Yet, the effects of various process parameters on the material removal rate (MRR) and the resulting surface topography are not well understood. In this chapter, accordingly, several polishing models are reviewed with emphasis on the mechanical aspects of CMP...
متن کاملOptimization of CMP from the Viewpoint of Consumable Effects
Systematic methods for the optimization of chemical mechanical planarization ~CMP! from the viewpoint of consumable effects are discussed. Two methods, one, the precision control and design of the pad topography, and the second, the precision control and design of the abrasive size distribution are proposed to optimize the material removal rate and nonuniformity in CMP based on a material remov...
متن کامل