Proposal Performance Measurement of ATSP Coating and Bulk PEEK Faced Tilting - Pad Thrust Bearings
نویسندگان
چکیده
Background: Under severe operating conditions, such as lubricant contamination, elevated temperatures and high unit loads, the hydrodynamic (HD) lubrication condition in a HD bearing may degrade and be reduced to mixed and boundary lubrication conditions, which traditional pad bearing materials (Babbitt metal) are not able to sustain. For example, Electrical Submersible Pump (ESP) systems are rated up to 220 ̊C, which is based on the last 80
منابع مشابه
Lubrication of Sliding Bearings for Hydropower Applications
The influence of pad facing material on hydrodynamic lubrication in tilting-pad thrustbearings is investigated in terms of pad and oil-film temperatures and oil-film thickness. Two tilting-pad thrust bearings are examined: one with babbitt pad facing, the other with a layer of a PTFE based composite material. Frictional torque, pad, collar and oil-film temperatures and oil-film thicknes...
متن کاملTribological behavior of PEEK components with compositionally graded PEEK/PTFE surfaces
PEEK is a high strength engineering thermoplastic that suffers from a high friction coefficient and a friction induced wear mode. Past studies with 0 m PEEK and PTFE powders resulted in composite solid lubricant that (at the optimal composition) had a wear rate of k= 2× 10−9 mm3/Nm ith a friction coefficient of μ= 0.12. A compositional grading of PEEK and PTFE is implemented in this study to cr...
متن کاملA Study of the Thermal Characteristics of the Leading Edge Groove and Conventional Tilting Pad Journal Bearings
Kingsbury, Inc., Philadelphia, PA 19154 In this paper dealing with the tilting pad journal bearing, experim'ental results are presented which show that, at higher shaft speeds, the leading-edge-groove (LEG) design has significantly lower operating temperatures to those of the conventional design of tilting pad journal bearing. Subsequent theoretical analysis has shown that this reduction in pad...
متن کاملA Baseline Theory for the Design of Oil-Lubricated Centrally Pivoted Plane-Pad Thrust Bearings
A baseline theory is developed in this paper for the design of oil-lubricated centrally pivoted plane-pad thrust bearings. By focusing on the hydrodynamics generated by the viscosity-temperature effects of the lubricating oil, a mathematical model is derived with a single dimensionless parameter Wth. The nominal value of Wth is 0.1 for typical pad bearings in current industrial practice. The th...
متن کاملEffect of Coating Materials on the Fatigue Behavior of Hip Implants: A Three-dimensional Finite Element Analysis
This study aims to validate, using finite element analysis (FEA), the design concept by comparing the fatigue behavior of hip implant stems coated with composite (carbon/PEEK) and polymeric (PEEK) coating materials corresponding to different human activities: standing up, normal walking and climbing stairs under dynamic loadings to find out which of all these models have a better performance in...
متن کامل