Investigation of Color Removal by Chemical Oxidation for Three Reactive Textile Dyes and Spent Textile Dye Wastewater

This research investigated the efficacy of chlorine dioxide (ClO2), ultraviolet (UV) irradiation, UV in combination with chlorine dioxide (UV/ClO2), and UV in combination with hydrogen peroxide (UV/H2O2) for decolorizing three reactive azo dyes (sultan red, indigo blue and cypress green) and treated textile-manufacturing wastewater. The objective was to determine the best treatment for reducing color to the Virginia Pollutant Discharge Elimination System (VPDES) permit level of 300 American Dye Manufacturers Institute (ADMI) units. The effects of the three chemical oxidation treatments provided color reduction for all three dyes. The results suggested UV/H2O2 and UV/ClO2 treatments provided maximum color reduction of the red and blue dyes, and UV/H2O2 was the most effective for maximum reduction of the green dye. A research goal was to provide predictive models of the wastewater effluent for the treatment processes, including the UV exposure time required to reach the 300 ADMI permit value and the effective ClO2 dose necessary to achieve the 300 units. The results of the investigations regarding the effluent indicated that UV/H2O2 and UV/ClO2 (5 mg/L) provided reduction to 300 units in less than 10 minutes UV exposure when the initial effluent color was less than 500 ADMI units. Without the addition of oxidant, contact times longer than 10 minutes were required for UV to decolorize these effluents to 300 ADMI units. Chlorine dioxide dosages between 10 and 30 mg/L both with and without UV irradiation achieved the same results.