Gold tetrahedra as building blocks in K3Au5Tr (Tr = In, Tl) and Rb2Au3Tl and in other compounds: a broad group of electron-poor intermetallic phases.

نویسندگان

  • Bin Li
  • Sung-Jin Kim
  • Gordon J Miller
  • John D Corbett
چکیده

The alkali-metal gold trielides K(3)Au(5)Tr (Tr = In (I), Tl (II)) and Rb(2)Au(3)Tl (III) have been obtained directly from the elements, and their orthorhombic structures determined by single-crystal X-ray diffraction means (I/II: Imma, a = 5.562(1), 5.595(1); b = 19.645(4),19.706(4); c = 8.502(2), 8.430(2) A; Z = 4, respectively; III: Pmma, a = 5.660(1), b = 6.741(1), c = 9.045(2) A, Z = 4). These exhibit zigzag chains of Tr that link puckered sheets (I/II) or chains (III) of gold tetrahedra condensed through shared vertices. The segregation of Au and Tr components is striking relative to the evidently stronger and preferred Au-Tr bonding in neighboring gold- and alkali-metal-poorer triel phases. The close packing of K/Rb (A) about the gold tetrahedra gives each A and Au(4) component 7-10 and 10 neighbors of the other type, respectively. Tight-binding-linear-muffin-tin-orbital-atomic sphere approximation band structure calculations show that the title phases lie near or at electronic pseudogaps. The gold substructure is the dominant feature of the densities of states, with moderately broad 5d(10) features as favored by relativistic effects. Likewise, crystal orbital Hamilton population results indicate optimization of Au-Au bonding at the expense of the stronger heteroatomic Au-Tr interactions. Stabilization of these unusual structures appears to follow in part from the presence of numerous short and individually weak A-Au interactions, as manifested by appreciable mixing of s, p, and d valence orbitals on A into network bonding states, Au 5d in particular. These and related phases define a family of Au(4)-based phases with particularly low e/a values of 1.2 to approximately 2.3 (over all atoms, omitting Au 5d), closely related to the cubic Laves-type structures. The same region also contains Tr-richer tunnel and network structures with relatively fewer cations that also appear to be dominated by Au-Au and Au-Tr bonding.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Gold’s Structural Versatility within Complex Intermetallics: From Hume-Rothery to Zintl and even Quasicrystals

Recent exploratory syntheses of polar intermetallic compounds containing gold have established gold’s tremendous ability to stabilize new phases with diverse and fascinating structural motifs. In particular, Au-rich polar intermetallics contain Au atoms condensed into tetrahedra and diamond-like three-dimensional frameworks. In Au-poor intermetallics, on the other hand, Au atoms tend to segrega...

متن کامل

Control of Formation of Intermetallic Compound in Dissimilar Joints Aluminum-steel

The elimination of the FexAly type phases was considered the solution to low ductility presented in aluminum-steel welded joints. Recently, the researches do not seek the suppression but the control of the thickness of these compounds. In this work, Al-Fe joints were manufactured by solid state and fusion welding, looking for controlling the formation of intermetallic comp...

متن کامل

Effect of the TLP process parameters on microstructure, mechanical properties and corrosion resistance of 316L stainless steel to pure commercial titanium joint with pure copper interface

In this research, effect of time and temperature of TLP process on the microstructure, mechanical properties and corrosion resistance of CP-Ti to 316L stainless steel joint evaluated. For this purpose pure copper foil with 100 µm thickness was used as interlayer and joining process carried out at 950˚C, 1000˚C and 1050˚C and for 90, 120 and 150 minutes. After the joining process, shear and micr...

متن کامل

Effect of the TLP process parameters on microstructure, mechanical properties and corrosion resistance of 316L stainless steel to pure commercial titanium joint with pure copper interface

In this research, effect of time and temperature of TLP process on the microstructure, mechanical properties and corrosion resistance of CP-Ti to 316L stainless steel joint evaluated. For this purpose pure copper foil with 100 µm thickness was used as interlayer and joining process carried out at 950˚C, 1000˚C and 1050˚C and for 90, 120 and 150 minutes. After the joining process, shear and micr...

متن کامل

HOW THE KONDO EFFECT CAN EXIST IN Gd INTERMETALLIC COMPOUNDS

Based on the crystal and magnetic structural properties of some Gd intermetallic compounds, it is shown that with increasing conduction electron concentration, Gd experiences electronic and magnetic instability, and that these behaviors point to the appearance of Kondo Lattice. We suggest that the conduction electrons have gained local character. It is shown that Kondo effect should be observed...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Inorganic chemistry

دوره 48 14  شماره 

صفحات  -

تاریخ انتشار 2009