Torque Analysis of Magnetic Spur Gear with Different Configurations
نویسندگان
چکیده
This paper presents design and torque analysis in various types of magnetic gear with different magnetic materials and air gap. This type of gear offer both high speed and high torque required for drive applications. In the proposed gear analysis the low speed side is connected to prime mover and high speed side is connected to load, suitable for wind power, automobile applications and group drive applications etc. The torque of the radial magnetic coupling between magnetic gears with different magnetic materials and different air gap length has been simulated usin MagNet software and the gear performances are compared. Finally, it is concluded that the result in this paper may help to initiate a shift from mechanical gears to magnetic gears. Indexed Terms – Analytical modeling, Finite element analysis, High torque, Magnetic gear.
منابع مشابه
A Comparative Study of Tooth Wear, Mechanical Power Losses and Efficiency in Normal and High Contact Ratio Asymmetric Spur Gears
The surface tooth wear which occurs at the gear contact region due to inadequate contact strength of the tooth is one of the predominant modes of gear failures. Currently, higher contact ratio spur gears are increasingly used in power transmission applications such as aircraft, wind turbine, automobiles and compact tracked vehicles due to their high load carrying capacity. In this work, the di...
متن کاملTorque Analysis of Perpendicular Magnetic Gear with High Gear Ratio
This paper presents design and analysis of torque and flux density in perpendicular magnetic gear with different magnetic materials, dimensions and air gap. The results were compared to each other. This type of gear offers both high gear ratio and high torque. Moreover the low speed side is connected to prime mover and high speed side is connected to load after analysis, which is sui table for ...
متن کاملA Study of Precision Forging of Steel Spur Gears: Upper Bound Model and Experiments
Precision forging process is widely used for the production of spur gears due to its advantages such as improved strength and surface finish, little waste of materials and reduction in the machining time of the gear. An important aspect of precision forging process is the load required to perform the process successfully and design the forging tools. In this research, a new kinematically admiss...
متن کاملInfluence of Addendum Modification Factor on Root Stresses in Normal Contact Ratio Asymmetric Spur Gears
Tooth root crack is considered as one of the crucial causes of failure in the gearing system and it occurs at the tooth root due to an excessive bending stress developed in the root region. The modern power transmission gear drives demand high bending load capacity, increased contact load capacity, low weight, reduced noise and longer life. These subsequent conditions are satisfied by the aid o...
متن کاملتحلیل کرانه فوقانی اکستروژن مستقیم چرخ دنده های ساده باپروفیل دندانه اصلاح شده
This paper describes an upper bound analysis of cold forward extrusion of spur gears with modified tooth profile. Spur gear geometrical parameters such as module, number of teeth, pressure angle, bore radius and addendum modification factor were input to a computer program written in Visual Basic. Then spur gear, billet and extrusion die cavity were modeled automatically in SolidWorks. For uppe...
متن کامل