Fluorocarbon Oil Reinforced Triple Emulsion Drops.
نویسندگان
چکیده
Fluorocarbon oil reinforced triple emulsion drops are prepared to encapsulate a broad range of polar and non-polar cargoes in a single platform. In addition, it is demonstrated that the fluorocarbon oil within the emulsion drop acts as an effective diffusion barrier, as well as a non-adhesive layer, enabling highly efficient encapsulation and retention of small molecules and active biomolecules in microcapsules.
منابع مشابه
Biocompatible surfactants for water-in-fluorocarbon emulsions.
Drops of water-in-fluorocarbon emulsions have great potential for compartmentalizing both in vitro and in vivo biological systems; however, surfactants to stabilize such emulsions are scarce. Here we present a novel class of fluorosurfactants that we synthesize by coupling oligomeric perfluorinated polyethers (PFPE) with polyethyleneglycol (PEG). We demonstrate that these block copolymer surfac...
متن کاملBreakup of a Multiple Emulsion Drop in a Uniform Electric Field.
The steady deformation and breakup of emulsion drops in a uniform electric field are considered experimentally. Due to the low volume fraction of inner drops, the emulsions can be effectively assumed as Newtonian fluids with spatial nonuniformity. The measurements of the electrical properties show that the oil-in-water (o/w) emulsion drop behaves like a conducting drop. On the other hand, the w...
متن کاملOne-step emulsification of multiple concentric shells with capillary microfluidic devices.
Emulsions have long been utilized to make materials for foods, drugs, cosmetics, and displays because of their efficient encapsulation properties. While they are most commonly made in bulk, recent advances in microfluidics have enabled the design and manipulation of emulsion drops with unprecedented control and flexibility, albeit only on a drop-bydrop basis. Multiple-phase emulsions of very hi...
متن کاملShort Communication Emulsion electrospinning: Composite fibers from drop breakup during electrospinning
*Correspo Engineer USA. E-mail: v We evaluate the feasibility of electrospinning oil-in-water type emulsions. The emulsions had an aqueous solution of polyethylene oxide (PEO) as the continuous phase, and either mineral oil or a polystyrene (PS) in toluene solution as the drop phase. The Taylor cones and electrified liquid jets were stable even when the emulsion drops were as large as a few-ten...
متن کاملAmphiphilic crescent-moon-shaped microparticles formed by selective adsorption of colloids.
We use a microfluidic device to prepare monodisperse amphiphilic particles in the shape of a crescent-moon and use these particles to stabilize oil droplets in water. The microfluidic device is comprised of a tapered capillary in a theta (θ) shape that injects two oil phases into water in a single receiving capillary. One oil is a fluorocarbon, while the second is a photocurable monomer, which ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Advanced materials
دوره 28 38 شماره
صفحات -
تاریخ انتشار 2016