Realization of a Laser Cooled Microwave Power Standard
نویسندگان
چکیده
We demonstrate the feasibility of a novel microwave power standard based on the electromagnetic interaction with laser-cooled atoms. Under the effect of the radiation, the internal state populations undergo a Rabi flopping oscillation. Measurement of the oscillation frequency allows the determination of the electromagnetic field strength. The measurements are made over a dynamic range of 18 dB and the standard deviation of the measurements is about 0.3%. The field strength was linear with the Rabi frequency within the accuracy of our measurements.
منابع مشابه
Realisation of a Frequency Standard Using an Atomic Fountain *
We report the realisation and preliminary study of a frequency standard using a fountain of laser cooled caesium atoms. Our apparatus uses a magneto-optical trap as a source of cold atoms and optical pumping to prepare the atoms in the correct state before they enter the microwave cavity.
متن کاملQuantum-based microwave power measurements: Proof-of-concept experiment
We present an initial proof-of-concept experiment to measure microwave power based on quantum-mechanical principles. Ground-state cesium atoms exposed to microwaves at 9.192 631 770 GHz oscillate between two hyperfine states at a rate that is proportional to the rf magnetic field strength. This provides a quantum-based method of measuring rf field strength that depends only on the fundamental p...
متن کاملRECENT IMPROVEMENTS IN NIST-F1 AND RESULTING ACCURACIES OF δf/f<7× 10 †
Since our last publication describing the accuracy budget for NIST-F1 (a laser-cooled Cs fountain primary frequency standard) we have made many improvements resulting in nearly a factor of 2 reduction in the uncertainty in the realization of the SI second. Recently we reported a combined standard fractional uncertainty of 0.67×10.
متن کاملEXPERIMENTAL AND NUMERICAL INVESTIGATION ON LASER BENDING PROCESS
Laser bending is an advanced process in sheet metal forming in which a laser heat source is used to shape the metal sheet. In this paper, temperature distribution in a mild steel sheet metal is investigated numerically and experimentally. Laser heat source is applied through curved paths in square sheet metal parts. Finite element (FE) simulation is performed with the ABAQUS/CAE standard softwa...
متن کاملMicrowave sidebands for laser cooling by direct modulation of a tapered amplifier.
Laser cooling of atoms usually necessitates several laser frequencies. Alkaline atoms, for example, are cooled by two lasers with a frequency difference in the gigahertz range. This gap cannot be closed with simple shifting techniques. Here, we present a method of generating sidebands at 6.6 GHz by modulating the current of a tapered amplifier, which is seeded by an unmodulated master laser. Th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2002