Optimization of Preform in Close Die Forging by Combination Of Neural Network and Genetic Algorithm
نویسنده
چکیده
In this essay, a combination of neural network and genetic algorithm has been studied for optimization of the preform in close die forging. Finite Volume Method (FVM) is used as a simulation tool for forging processes. The simulation results have used in the neural network and the genetic algorithm has been employed to optimize the forging force. The neural network was used in three stages for modeling the system. Stage 1 stands for achieving preform shape by open die forging and in stage 2 it has been used to close die forging for attaining the force and in stage 3 for the filling of the die cavity. Geometrical parametric design was used for accelerating the operation. The guideline of simulating operation and optimization has been suggested in a flow chart. An aeronautical forging component has been selected as a case study. Results show a small difference (0.3%) between neural network and direct simulation results. A final reduction of forging force 50% was obtained by optimizing the preform shape.
منابع مشابه
Optimum Designing of Forging Preform Die for the H-shaped Parts Using Backward Deformation Method and Neural Networks Algorithm
In a closed die forging process, it is impossible to form complex shapes in one stage, and thus it becomes necessary to use preform dies. In the present study, Backward Deformation Method and FE simulation via ABAQUS software has been used in order to design preform die of the H-shaped parts. In the Backward Deformation Method, the final shape of the part is considered as a starting point and u...
متن کاملOptimum Designing of Forging Preform Die for the H-shaped Parts Using Backward Deformation Method and Neural Networks Algorithm
In a closed die forging process, it is impossible to form complex shapes in one stage, and thus it becomes necessary to use preform dies. In the present study, Backward Deformation Method and FE simulation via ABAQUS software has been used in order to design preform die of the H-shaped parts. In the Backward Deformation Method, the final shape of the part is considered as a starting point and u...
متن کاملOptimization of Flash, Billet Dimensions and Friction Factor in Closed Die Cold Forging Process
Three important parameters in designing a closed die for forging process are ratio of width to flash thickness, ratio of height to billet diameter and the friction factor. In this paper the influences of these parameters on the required force for the forging and percentage of die filling were investigated. It was found that by controlling the flash dimension, the material loss is reduced and t...
متن کاملThe Optimization of the Effective Parameters of the Die in Parallel Tubular Channel Angular Pressing Process by Using Neural Network and Genetic Algorithm Methods
One of reasons that researchers in recent years have tried to produce ultrafine grained materials is producing lightweight components with high strength and reliability. There are disparate methods for production of ultra-fine grain materials,one of which is severe plastic deformation method. Severe plastic deformation method comprises different processes, one of which is Parallel tubular chann...
متن کاملThe Optimization of the Effective Parameters of the Die in Parallel Tubular Channel Angular Pressing Process by Using Neural Network and Genetic Algorithm Methods
One of reasons that researchers in recent years have tried to produce ultrafine grained materials is producing lightweight components with high strength and reliability. There are disparate methods for production of ultra-fine grain materials,one of which is severe plastic deformation method. Severe plastic deformation method comprises different processes, one of which is Parallel tubular chann...
متن کامل