Polyurethane: An Introduction
نویسندگان
چکیده
The discovery of polyurethane [PU] dates back to the year 1937 by Otto Bayer and his coworkers at the laboratories of I.G. Farben in Leverkusen, Germany. The initial works focussed on PU products obtained from aliphatic diisocyanate and diamine forming polyurea, till the interesting properties of PU obtained from an aliphatic diisocyanate and glycol, were realized. Polyisocyanates became commercially available in the year 1952, soon after the commercial scale production of PU was witnessed (after World War II) from toluene diisocyanate (TDI) and polyester polyols. In the years that followed (1952-1954), different polyester-polyisocyanate systems were developed by Bayer.
منابع مشابه
Correlation Between the Acoustic and Cell Morphology of Polyurethane/Silica Nanocomposite Foams: Effect of Various Proportions of Silica at Low Frequency Region
Introduction: Reducing noise pollution has become an essential issue due to the increase in public concern and also social demands for a better lifestyle. Using sound absorption materials is a preferred method to reduce the noise pollution. Undesirable properties of pure polyurethane such as poor absorption of mechanical energy in narrow frequency ranges can be improved by providing polymeric n...
متن کاملDevelopment of Styrene-Grafted Polyurethane by Radiation-Based Techniques
Polyurethane (PU) is the fifth most common polymer in the general consumer market, following Polypropylene (PP), Polyethylene (PE), Polyvinyl chloride (PVC), and Polystyrene (PS), and the most common polymer for thermosetting resins. In particular, polyurethane has excellent hardness and heat resistance, is a widely used material for electronic products and automotive parts, and can be used to ...
متن کاملImmobilization of Streptomyces gulbargensis in Polyurethane Foam: A Promising Technique for L-asparaginase Production on
In the present study, Streptomyces gulbargensis and its mutant form, S.gulbargensis mu24, immobilized on polyurethane foam were investigated for the production of L-asparaginase using groundnut cake extract as medium. The medium with an initial pH of 8.5 was inoculated with free and immobilized cells separately and then subjected to fermentation by incubation at 40oC and shaking at 200 rev/min....
متن کاملSubclavian central venous catheter-related thrombosis in trauma patients: incidence, risk factors and influence of polyurethane type
INTRODUCTION The incidence of deep venous thrombosis (DVT) related to a central venous catheter varies considerably in ICUs depending on the population included. The aim of this study was to determine subclavian central venous catheter (SCVC)-related DVT risk factors in severely traumatized patients with regard to two kinds of polyurethane catheters. METHODS Critically ill trauma patients nee...
متن کاملتهیه الاستومر پلی یورتانی با استفاده از HTPB سنتز شده به روش پلیمریزاسیون رادیکالی زنده با واسطه نایتروکساید: سنتز، (علمی-پژوهشی)
In order to increasing of hydroxy functionality of HTPB an in-situ nitroxide mediated polymerization (NMP) of 1,3-butadiene was carried out in presence of TEPA as a polyfunctional nitroxide precursor. The multi-modal molar mass distribution of the product was elucidated by reductive hydrolyzation of the oligomeric product. The new polyfunctional hydroxyl-terminated polybutadiene (PFHTPB) was c...
متن کاملBiological Evaluation of Flexible Polyurethane/Poly l-Lactic Acid Composite Scaffold as a Potential Filler for Bone Regeneration
Degradable bone graft substitute for large-volume bone defects is a continuously developing field in orthopedics. With the advance in biomaterial in past decades, a wide range of new materials has been investigated for their potential in this application. When compared to common biopolymers within the field such as PLA or PCL, elastomers such as polyurethane offer some unique advantages in term...
متن کامل