Colour Stability of Various Types of Acrylic Teeth Exposed to Coffee, Tea and Cola

نویسندگان

  • Mousavi S
  • Narimani S
  • Hekmatfar S
  • Jafari K
چکیده

STATEMENT OF PROBLEM Acrylic teeth of dentures are prone to discoloration due to frequent exposure to different colouring solutions in the oral environment. Thus, in order to maintain their aesthetic appearance, they must possess high colour stability while exposed to colorant solutions. OBJECTIVES To compare the colour stability of three different brands of acrylic teeth following immersion in coffee, tea and cola. MATERIALS AND METHODS This in vitro experimental study was conducted on 90 acrylic teeth in three groups (n = 30) of Ivoclar (Italy), PolyDent (Slovenia) and Apple (Iran). The teeth were immersed in coffee, cola and tea for one, three and six weeks (the teeth were not in contact with each other). Colour parameters were assessed before and after immersion using a spectrophotometer, and overall change in colour parameters was calculated. The overall colour change (ΔE) of the three groups at different time points was analyzed using one-way ANOVA. Pairwise comparisons were performed using Tukey's test. RESULTS Coffee caused the greatest colour change in Apple acrylic teeth after six weeks (mean ΔE of 4.6 for coffee and 3.4 for tea and cola). Tea caused an almost equal colour change in the three groups. The greatest colour change in the Ivoclar teeth occurred in cola after six weeks (mean ΔE of 3.3, 3.4 and 2.8 for cola, tea and coffee, respectively). The greatest ΔE occurred at six weeks and was the highest in Apple, followed by PolyDent and then Ivoclar teeth in coffee (mean ΔE of 4.6, 3.4 and 3.3, respectively p < 0.001). CONCLUSIONS Despite the significant colour change in the three groups, ΔE in Ivoclar group was within the clinically acceptable range of ≤ 3.3. A slight colour change was expected regarding the Apple and PolyDent acrylic teeth clinically.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Color stability of different denture teeth materials: an in vitro study.

The aim of this in vitro study was to compare the color stability of commercially available porcelain, reinforced acrylic, and conventional acrylic denture teeth materials used in removable prostheses. Two brands of porcelain (Unilux-Enta Lactona-Holland and Vivoperl-Ivoclar-Liechtenstein), 2 brands of reinforced acrylic (Optodent-Bayer-Germany and Ivolek-Ivoclar-Liechtenstein), and 2 brands of...

متن کامل

Color stability and flexural strength of poly (methyl methacrylate) and bis-acrylic composite based provisional crown and bridge auto-polymerizing resins exposed to beverages and food dye: an in vitro study.

AIM To evaluate the color stability and flexural strength of poly (methyl methacrylate) (PMMA) and bis-acrylic composite based provisional crown and bridge auto-polymerizing resins exposed to tea, coffee, cola, and food dye. MATERIALS AND METHODS Two provisional crown and bridge resins, one DPI self-cure tooth molding powder (PMMA) (Group A), and one Protemp 4 Temporization Material (bis-acry...

متن کامل

Effect of surface finishing on the colour stability and translucency of dental ceramics

BACKGROUND The purpose of this study was to investigate the effects of staining solutions and surface finishing on the colour stability and translucency of hybrid ceramic (HC) and resin nanoceramic (RNC) materials. METHODS Twenty four groups consisting of 10 specimens (240 specimens in total) were created out of HC and RNC, including six groups to be stored in distilled water served as the co...

متن کامل

Evaluation of the Effect of 2 Flask Investment Materials on Color Stability of 5 Brands of Denture Teeth

Introduction: The purpose of this study was to investigate the effect of flask investment materials on the color changes of different brands of resin denture teeth. Methods: Resin denture teeth (560) were divided into 2 groups according to the materials used for flask investment (silicone or gypsum). All the specimens were thermocycled between 4°C and 60°C with 60-s dwell times for 1,000 cycles...

متن کامل

Effects of thermocycling and various drinks on the color stability of heat-polymerized acrylic resin

PURPOSE The discoloration of acrylic resin denture bases may lead to significant esthetic problems. The aim of this in vitro study was to investigate the effects of frequently consumed drinks on the color changes of fresh and aged, heat-polymerized, conventional acrylic resin. MATERIALS AND METHODS Eighty-four, heat-polymerized acrylic resin specimens (4 mm x 5 mm x 30 mm) were fabricated. Ha...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 3  شماره 

صفحات  -

تاریخ انتشار 2016