DNS of turbulent boundary layer with time-periodic blowing through a spanwise slot
نویسنده
چکیده
Direct numerical simulations are extended to see the effects of time-periodic blowing frequency from a spanwise slot on a turbulent boundary layer. The time-periodic blowing frequency is given in a range 0≤f≤0.08 at a fixed blowing amplitude of A=0.5. The effects of the blowing frequency are scrutinized by examining the phaseor time-averaged turbulent statistics. A most effective blowing frequency is obtained at f=0.03, where the maximum increases of Reynolds shear stress, streamwise vorticity fluctuations and energy redistribution are made. The phase-averaged stretching and tilting terms are studied for analyzing the increase of streamwise vorticity fluctuations which is closely related to turbulent coherent structures. Keyword: periodic blowing, spanwise slot, turbulent boundary layer, DNS, energy redistribution
منابع مشابه
Influence on the Hypersonic Boundary-Layer Flow
For aerospace or hypersonic cruise vehicle the state of the boundary layer is of great importance because for turbulent boundary layers, the thermal loads and skin friction are higher than in laminar boundary layers. Therefore , knowledge of cooling features and laminar-turbulent transition is necessary for the design of the thermal protection system (TPS). Different strategies are used to redu...
متن کاملDns of the Generation of Secondary -vortices in a Transitional Boundary Layer
Especially for large amplitude initial disturbances so called vortices de velop during the non linear late stages of laminar turbulent transition Once formed they may persist as so called hairpin vortices well into the ensuing turbulent boundary layer This makes their study important for under standing transition and turbulence in wall bounded shear ows In Direct Numerical Simulations DNS as we...
متن کاملNumerical Investigations of Effusion Cooling in Hypersonic Boundary-Layer Flow
Direct numerical simulations (DNS) are carried out to investigate the effect of effu-sion cooling by blowing through spanwise slits and discrete holes in a laminar flat-plate boundary layer at various Mach numbers. The comparison with experimental data for a Mach-2.67 boundary layer with a cool wall and a spanwise slit shows good agreement. For an adiabatic Mach-6 boundary layer, the focus of t...
متن کاملInstability of streaky structure in a Blasius boundary layer
An experimental study was performed to analyze the stability of localized streaky structure in a Blasius boundary layer. An artificial streaky structure was created by using suction or blowing through a thin spanwise slot at the wall. The velocity gradient generated by the suction or blowing was controlled by a damper. The Reynolds number based on the displacement thickness d1 was Red1 =280 at ...
متن کاملDNS of transition in supersonic boundary layers
This paper performs Direct Numerical Simulation of transition induced by blowing and suction in a spatially evolving Mach 2.25 supersonic boundary layer. We use a novel algorithm (Park & Mahesh 2007) capable of solving compressible flow on unstructured grids. Our objective is to evaluate our unstructured capability to simulate supersonic transition. Transition is achieved using controlled perio...
متن کامل