Subspace identification of wind turbine shaft vibrations measured with a piezoelectric sensor
نویسندگان
چکیده
The paper presents a new approach to the parameter identification of a wind turbine shaft vibrations measured with piezoelectric sensor. The system order and unknown processes matrices are determined using the wind force as the model input and wind turbine shaft vibrations as the model output. The identified model can be used to estimate the shaft vibrations and design an early damage monitoring system. The real system results have been presented.
منابع مشابه
Effect of Different Turbine-generator Shaft Models on the Subsynchronous Resonance Phenomenon in the Double Cage Induction Generator Based Wind Farm
This paper focuses on the turbine-generator shaft models of double-cage Induction Generator (IG) based wind farm and its influence on the sub-synchronous resonance phenomenon. For this purpose, six different shaft models as 6-mass, 4-mass, 3-mass I, 3-mass II, 2-mass and 1-mass models are considered for double-cage IG wind-turbine. By using the linear modal analysis method, the effects of the d...
متن کاملA Pattern Recognition Approach to Acoustic Emission Data Originating from Fatigue of Wind Turbine Blades
The identification of particular types of damage in wind turbine blades using acoustic emission (AE) techniques is a significant emerging field. In this work, a 45.7-m turbine blade was subjected to flap-wise fatigue loading for 21 days, during which AE was measured by internally mounted piezoelectric sensors. This paper focuses on using unsupervised pattern recognition methods to characterize ...
متن کاملMeasurement of Instantaneous Shaft Speed by Advanced Vibration Signal Processing - Application to Wind Turbine Gearbox
Condition monitoring of machines working under non-stationary operations is one of the most challenging problems in maintenance. A wind turbine is an example of such class of machines. One of effective approaches may be to identify operating conditions and investigate their influence on used diagnostic features. Commonly used methods based on measurement of electric current, rotational speed, p...
متن کاملA Full-Scale Fatigue Test of 9-m CX-100 Wind Turbine Blades
This paper presents the SHM result of a 9m CX-100 wind turbine blade under fullscale fatigue loads. The test was performed at the National Renewable Energy Laboratory. The 9-meter blade was instrumented with piezoelectric transducers, accelerometers, acoustic emission sensors, and foil strain gauges on the surface of the blade. The blade underwent fatigue excitation at 1.8 Hz for defined interv...
متن کاملDirect load measurement of a Wind Turbine High Speed Shaft Bearing in the Field
Small piezoelectric transducers bonded to the outer raceway of a rolling element bearing can be used to send ultrasonic pulses to the element-raceway contact and receive reflections. Interpretation of the magnitude and time of flight (ToF) of the reflections can be used to deduce amount of load imparted between roller and raceway. The approach is most successful when the sensor is smaller than ...
متن کامل