Long-period grating fabricated by periodically tapering standard single-mode fiber.
نویسندگان
چکیده
We fabricated an asymmetric long-period grating (LPG) by periodically tapering a section of standard single-mode fiber using a resistive filament heating. The LPG exhibits large peak transmission attenuation of -30.31 dB with only 22 periods in a 1.0 cm long optical fiber and possesses unique characteristics for sensing applications. The bending and strain sensitivities are 1.74 nm m and 1.11 pm/mu epsilon, respectively. The polarization dependent loss is large, up to 11.65 dB, which is caused by an asymmetric index profile in the cross section of the tapered LPG.
منابع مشابه
Long period fiber grating formed by periodically structured microholes in all-solid photonic bandgap fiber.
A new type long period fiber grating is fabricated in all-solid photonic bandgap fiber by periodically drilling microholes using femtosecond laser pulse irradiation. Such a structure introduces a strong refractive index modulation in the waveguide structure and hence exhibits a compact grating dimension. Both the simulation and the experimental results confirm the existence of the light couplin...
متن کاملLong period grating in multicore optical fiber: an ultra-sensitive vector bending sensor for low curvatures.
Long period grating was UV inscribed into a multicore fiber consisting of 120 single mode cores. The multicore fiber that hosts the grating was fusion spliced into a single mode fiber at both ends. The splice creates a taper transition between the two types of fiber that produces a nonadiabatic mode evolution; this results in the illumination of all the modes in the multicore fiber. The spectra...
متن کاملHigh-Order Modes Micro-Knot Excited by a Long-Period Fiber Grating
We suggest a fiber micro-knot fabricated on a long-period fiber grating. The long-period fiber grating excites high-order modes into the micro-knot and transfers the output back to the Gaussian mode. We show theoretically and experimentally that these micro-knots have an improved Q-factor, higher stability, and have an increased evanescence wave coupling to the environment than single mode fibe...
متن کاملNumerical Approach to Modeling and Characterization of Refractive Index Changes for a Long-Period Fiber Grating Fabricated by Femtosecond Laser
A 3D finite element model constructed to predict the intensity-dependent refractive index profile induced by femtosecond laser radiation is presented. A fiber core irradiated by a pulsed laser is modeled as a cylinder subject to predefined boundary conditions using COMSOL5.2 Multiphysics commercial package. The numerically obtained refractive index change is used to numerically design and exper...
متن کاملIn-fiber polarizer based on a long-period fiber grating written on photonic crystal fiber.
A novel in-fiber polarizer based on a long-period fiber grating (LPFG) is written by using a focused CO2 laser beam to notch a photonic crystal fiber periodically. Such a polarizer exhibits a high polarization extinction ratio of more than 20 dB over a wide wavelength range of ~11 nm near 1550 nm and a very low temperature sensitivity of 3.9 pm/ degrees C, which overcomes the disadvantages of t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Applied optics
دوره 47 10 شماره
صفحات -
تاریخ انتشار 2008