VIII-Metals-J-Corrosion protection-1_ CORROSION PROTECTION OF METALS

ثبت نشده
چکیده

Nearly all metals, with the exception of gold and platinum, will corrode in an oxidising environment forming compounds such as oxides, hydroxides and sulphides. The degradation of metals by corrosion is a universal reaction, caused by the simple fact that the oxide of a metal has a much lower energy than the metal itself. Hence there is a strong driving force for the oxidation of metals. For example the familiar metal aluminium, which is used in aircraft, window frames and cooking utensils, is attacked by oxygen to form the oxide as follows:

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Drugs/Antibiotics as potential corrosion inhibitors for Metals - A Review

Corrosion protection of metals and alloys is a prime activity of technical, economic, environmental, and aesthetical significance. The use of inhibitors is one of the best choice of combating metals and alloys against detoriation against environmental impact. The toxicity of organic and inorganic corrosion inhibitors to the environment has provoked the search for ecofriendly corrosion inhibitor...

متن کامل

5>J Corrosion Inhibitors

A corrosion inhibitor is a chemical substance which, when added in small concentrations to an environment, minimizes or prevents corrosion [I]. Corrosion inhibitors are used to protect metals from corrosion, including temporary protection during storage or transport as well as localized protection, required, for example, to prevent corrosion that may result from accumulation of small amounts of...

متن کامل

Conducting Polymer Nanocomposites for Anticorrosive and Antistatic Applications

Intrinsically conducting polymers (ICPs) have been considered for use in various applica‐ tions. One of the most important applications of these materials which are attracting consid‐ erable attention in the most recent times is in corrosion protection of oxidizable metals [1]. The effective use of conducting polymers for corrosion protection of metals can be carried out by different methods; l...

متن کامل

Volatile inhibitors of metal corrosion II. Interaction of systems being protected with the environment and corrosion prevention conditions

This paper is a continuation of a series of publications dealing with the protection of metals by volatile corrosion inhibitors (VCIs). It presents a review on the propagation of VCI vapors, VCI distribution in the volume being protected, and specifics of vapor-phase protection of isolated systems and systems interacting with the environment in various ways. The review is supplemented by the au...

متن کامل

Corrosion and Cathodic Protection in Underground Piping Systems

THE GALVANIC CELL The major corrosion concern in the water works industry is “galvanic” corrosion. Galvanic corrosion takes place due to current flow in a “galvanic cell” which is defined as (1) two dissimilar metals, an anode and a cathode, (2) in electrical contact with each other and (3) a common electrolyte. A galvanic cell is produced when the pipeline components come in contact with the s...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2002