The Protection of Industrial Electronics and Power Conversion Equipment Against Power Supply and Data Line Disturbances
نویسنده
چکیده
The irresistible trend toward distributed computing systems for the control of industrial power electronic equipment is adding new dimensions to the old problem o f surge protection. Harmful surges may be produced by lightning, power switching, or by differences i n ground potentials. The objective o f the paper is t o provide increased awareness and better understanding o f the fundamentals o f protection as well as the characteristics o f protective devices.
منابع مشابه
Control of DVR by Fuzzy Controller to Improve Voltage in Distribution System
With the development of critical loads, power quality problem has become particularly important and poor power quality will be cause many adverse effects and the cost of many deaths will follow. To improve power quality and protection of sensitive loads against grid disturbances have been used new equipment based on power electronics similar FACTs devices, they are Custom Power. One of the most...
متن کاملHigh-performance and Low-power Clock Branch Sharing Pseudo-NMOS Level Converting Flip-flop
Multi-Supply voltage design using Cluster Voltage Scaling (CVS) is an effective way to reduce power consumption without performance degradation. One of the major issues in this method is performance and power overheads due to insertion of Level Converting Flip-Flops (LCFF) at the interface from low-supply to high-supply clusters to simultaneously perform latching and level conversion. In this p...
متن کاملThe Effectiveness of Dynamic Voltage Restorer with the Distribution Networks for Voltage Sag Compensation
This paper discusses the Dynamic voltage restorer (DVR) operation and control for Voltage sags compensation. DVR is a series connected power electronic based device that can quickly mitigate the voltage sags in the system and restore the load voltage to the pre-fault value. Voltage sag associated with faults in transmission and distribution systems, energizing of transformers, and starting of l...
متن کاملSensitivity Assessment of Lightning Protection Device Aging Effect on Distribution Substation Insulation
Insufficient electrical endurance of equipment and insulation failure against overvoltage is one of the most effective reasons for failure the power line. Lightening, switching or other disruptive parameters can cause line outage or distribution substation failure. There are different devices used to improve the safety, reliability, and power quality of the system. Surge arresters are one of t...
متن کاملSimultaneous power sharing and protection against faults for DGs in microgrid with different loads
The LVRT (Low Voltage Ride Through) is the main characteristic of every power system in faulty conditions. When fault occurs, it is essential for power system such as microgrid to control the voltage and frequency normally. Naturally in fault status, the unbalanced voltage and current are inevitable, but with the aid of LVRT technique, microgrid can keep stability in main system parameters such...
متن کامل