Low-Temperature Synthesis of a PtRu/Nb0.1Ti0.9O2 Electrocatalyst for Methanol Oxidation

نویسندگان

  • Brenda L. García
  • Roderick Fuentes
  • John W. Weidner
چکیده

Niobium was doped into anatase TiO2 support at 10 mol % Nb0.1Ti0.9O2 using sol-gel chemistry. A PtRu/Nb0.1Ti0.9O2 catalyst was synthesized by LiBH4 reduction in tetrahydrofuran. The methanol electro-oxidation activity of the catalyst shows that this oxide support was electrically conductive. The current A/gPt was 6% higher on the PtRu/Nb0.1Ti0.9O2 catalyst compared to a commercial PtRu/C catalyst at 25°C. The electrochemically active surface area of the PtRu/C was 94% higher than PtRu/Nb0.1Ti0.9O2, thus the current per active site was 100% higher on PtRu/Nb0.1Ti0.9O2. A membrane electrode assembly with PtRu/Nb0.1Ti0.9O2 had 46% higher current A/gPt than an equivalent E-TEK membrane electrode assembly at 70°C. © 2007 The Electrochemical Society. DOI: 10.1149/1.2732074 All rights reserved.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Preparation and Characterization of Electrocatalyst Nanoparticles for Direct Methanol Fuel Cell Applications Using β-D-glucose as Protection Agent

In this study, the activity, stability and performance of carbon supported platinum (Pt/C) electrocatalyst in cathode and carbon supported Pt and ruthenium (PtRu/C) electrocatalyst in anode of direct methanol fuel cell (DMFC) were studied. The Pt/C and PtRu/C electrocatalysts were prepared by impregnation reduction method. The β-D-glucose was used as protection agent to reduce the particle size...

متن کامل

Synthesis and characterization of Pt3Co bimetallic nanoparticles supported on MWCNT as an electrocatalyst for methanol oxidation

The impregnation method was used to synthesize Pt and Pt3Co supported on MWCNTs applying NaBH4 as the reducing agent. The structure, morphology, and chemical composition of the electrocatalysts were characterized through SEM, XRD, and EDX. X-ray diffraction showed a good crystallinity of the supported Pt nanoparticles on the composites and showed the formation of Pt3<...

متن کامل

Synthesis and characterization of Pt3Co bimetallic nanoparticles supported on MWCNT as an electrocatalyst for methanol oxidation

The impregnation method was used to synthesize Pt and Pt3Co supported on MWCNTs applying NaBH4 as the reducing agent. The structure, morphology, and chemical composition of the electrocatalysts were characterized through SEM, XRD, and EDX. X-ray diffraction showed a good crystallinity of the supported Pt nanoparticles on the composites and showed the formation of Pt3<...

متن کامل

Cerium-Promoted PtRu/MWNTs As the Anode Catalyst for Methanol Electro-Oxidation

In the present study, PtRuCe/MWNTs nanocatalysts synthesized via polyol process technique are applied as anode electro-catalyst in methanol electro-oxidation reaction (MOR). To characterize the nanocatalysts, TEM, XRD, EDS and XPS are investigated. Cyclic voltammetry and choronoamperometry are used to evaluate the electro-catalytic activ...

متن کامل

Kinetic study of ethanol and methanol electro-oxidation on Pd-vulcan XC-72R/Cu electrocatalyst in alkaline media

Abstract In this study , palladium nano-particles were electro deposited galvano - statically on carbon black powder (Vulcan XC -72R). The catalytic activity for electro - oxidation of ethanol and methanol in alkaline media were studied by cyclic voltammetry and linear sweep voltammetry techniques. The results indicated that the electro-oxidation of ethanol and methanol strongly depends o...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2007