Facial anthropometric dimensions of Koreans and their associations with fit of quarter-mask respirators.

نویسندگان

  • Hyunwook Kim
  • Don-Hee Han
  • Young-Man Roh
  • Kangyoon Kim
  • Yong-Gyu Park
چکیده

Past studies on respirator fit or performance have mostly been done for Whites or male subjects, and little attention has been paid to minorities and Asians. To fill this gap, this study was designed to provide facial anthropometric data for Koreans and to analyze the association between facial dimensions and respirator fit factors for three brands of quarter-mask respirators, two domestic and one imported brand, using a Portacount 8020. A total of 110 university student subjects, 70 males and 40 females volunteered for participation in the study. The results of this study showed that Korean males and females have different facial dimensions as compared with those of White males and females. Unexpectedly, the imported respirator performed better than the domestic respirators. Males were found to achieve better respirator fit than females regardless of respirator brands tested. The regression analysis found no common prognostic variables with the three respirator brands studied. A stepwise logistic regression analysis was conducted to find predictive facial dimensions with respirator fits. Some facial dimensions were found to be statistically significant, but these dimensions are different from the traditionally recommended facial dimensions of face length and lip width for quarter mask. To improve respirator fit for Koreans, these different facial characteristics need to be considered in the design of quarter mask respirators.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

The effect of gender and respirator brand on the association of respirator fit with facial dimensions.

This study examined the association of facial dimensions with respirator fit considering the effect of gender and respirator brand. Forty-one subjects (20 white females and 21 white males) participated in the study. Each subject was measured for 12 facial dimensions using anthropometric sliding and spreading calipers and a steel measuring tape. Three quantitative fit tests were conducted with t...

متن کامل

Development of prototypes of half-mask facepieces for Koreans using the 3D digitizing design method: a pilot study.

In the Korean market there are several respirators for industrial purposes. Some of them are imported from global manufacturers such as 3M, and the others are developed by domestic companies. However, some of the locally made respirators have a face-seal leakage problem because they were not designed taking into account Korean facial characteristics. This pilot study was conducted to develop th...

متن کامل

Characterization of small-to-medium head-and-face dimensions for developing respirator fit test panels and evaluating fit of filtering facepiece respirators with different faceseal design

A respirator fit test panel (RFTP) with facial size distribution representative of intended users is essential to the evaluation of respirator fit for new models of respirators. In this study an anthropometric survey was conducted among youths representing respirator users in mid-Taiwan to characterize head-and-face dimensions key to RFTPs for application to small-to-medium facial features. The...

متن کامل

Evaluation of half-face respirator fit in an Iranian petrochemical company's workers

Introduction: The performance of respirator-face piece is depending on a good contact between the worker's face and the respirator. Improper sealing can cause reduction in performance of respirators to protect health and safety of workers against risks related to chemical agents at work. This study is aimed to evaluate the fitness of half-face respirators and other related factors on it in an...

متن کامل

Factors affecting the location and shape of face seal leak sites on half-mask respirators.

While there have been a number of studies on the effect of leak site and shape on the magnitude of measured leakage through respirator face seals, there have been very few studies to identify the location and size of these leaks. In a previous study we used a method of identifying the location and shape of respirator leaks on a half-mask respirator by the deposition of a fluorescent tracer duri...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Industrial health

دوره 41 1  شماره 

صفحات  -

تاریخ انتشار 2003