Quasi-Living Polymerization of Propene with an Isotactic-Specific Zirconocene Catalyst.

نویسندگان

  • Kei Nishii
  • Miyuki Murase
  • Takeshi Shiono
چکیده

Propene polymerization with isotactic (iso)-specific C₂-symmetric rac-Me₂Si(2-Me-Benz(e)-Ind)₂ZrCl₂ (1) and rac-Me₂Si(2-Me-4-Ph-1-Ind)₂ZrCl₂ (2) were conducted under various conditions for achieving iso-specific living polymerization of propene. When Complex 1 was activated with trialkylaluminum-free modified methylaluminoxane (dMMAO) at -40 °C, the number-average molecular weight (Mn) linearly increased against the polymerization time to reach Mn = 704,000 within 15 min of polymerization, although the molecular weight distributions was broad (Mw/Mn < 3). Thus, it was found that quasi-living polymerization of propene proceeded in the 1-dMMAO system. The living nature of iso-polypropene was confirmed by the block copolymerization, where the Mn value increased from 221,000 to 382,000 after the addition of 1-octene to yield the block copolymer with a melting point of 150 °C.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Cationic alkylaluminum-complexed zirconocene hydrides as participants in olefin polymerization catalysis.

The alkylaluminum-complexed zirconocene trihydride cation [(SBI)Zr(μ-H)(3)(Al(i)Bu(2))(2)](+), which is obtained by reaction of (SBI)ZrCl(2) with [Ph(3)C][B(C(6)F(5))(4)] and excess HAl(i)Bu(2) in toluene solution, catalyzes the formation of isotactic polypropene when exposed to propene at -30 °C. This cation remains the sole observable species in catalyst systems free of AlMe compounds. In the...

متن کامل

POLYMERIZATION OF PROPENE WITH BuNSiMe2C5Me4TiMe2: EFFECTS OF TRIALKYLALUMINIUMS AS ADDITIVES

ABSTRACT. Propene was polymerized at 0 C with tBuNSiMe2C5Me4TiMe2/MAO. Kinetic features and other parameters indicated quasi-living polymerization. Effects of various trialkylaluminiums as additives have been investigated; it was found that compounds with more bulky groups like iBu3Al, Oct3Al increased the activities significantly whereas Me3Al and Et3Al reduced the activities of the catalyst s...

متن کامل

Polymerization of sterically hindered a-olefins with single-site group 4 metal catalyst precursors

A variety of group 4 metal catalytic systems (C2-symmetric {EBTHI}-, {SBI}-type zirconocene complexes (C2-1–4); C1-symmetric (C1-5–8) and Cs-symmetric (Cs-9) {Cp/Flu}-type zirconocene complexes; Cp*2ZrCl2 (Cp* 2-10)), half-metallocene complexes (CpTiCl3, HM-11), constrained-geometry (CGC-12) titanium catalysts) and post-metallocene catalysts (Dow’s ortho-metallated amido-pyridino hafnium comple...

متن کامل

Stereoregular Brush Polymers and Graft Copolymers by Chiral Zirconocene-Mediated Coordination Polymerization of P3HT Macromers

Two poly(3-hexylthiophene) (P3HT) macromers containing a donor polymer with a polymerizable methacrylate (MA) end group, P3HT-CH2-MA and P3HT-(CH2)2-MA, have been synthesized, and P3HT-(CH2)2-MA has been successfully homopolymerized and copolymerized with methyl methacrylate (MMA) into stereoregular brush polymers and graft copolymers, respectively, using chiral ansa-zirconocene catalysts. Macr...

متن کامل

Zirconium-allyl complexes as resting states in zirconocene-catalyzed α-olefin polymerization.

UV-vis spectroscopic data indicate that zirconocene cations with Zr-bound allylic chain ends are generally formed during olefin polymerization with zirconocene catalysts. The rates and extent of their formation and of their re-conversion to the initial pre-catalyst cations depend on the types of zirconocene complexes and activators used.

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Molecules

دوره 22 5  شماره 

صفحات  -

تاریخ انتشار 2017