Failure time and critical behaviour of fracture precursors in heterogeneous materials

نویسنده

  • A. Guarino
چکیده

The acoustic emission of fracture precursors, and the failure time of samples of heterogeneous materials (wood, fiberglass) are studied as a function of the load features and geometry. It is shown that in these materials the failure time is predicted with a good accuracy by a model of microcrack nucleation proposed by Pomeau. We find that the time interval δt between events (precursors) and the energy ε are power law distributed and that the exponents of these power laws depend on the load history and on the material. In contrast, the cumulated acoustic energy E presents a critical divergency near the breaking time τ which is E ∼ ( τ−t τ ) −γ . The positive exponent γ is independent, within error bars, on all the experimental parameters.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

The critical exponents of fracture precursors

The acoustic emission of fracture precursors is measured in heterogeneous materials. The statistical behaviour of these precursors is studied as a function of the load features and the geometry. We find that the time interval δt between events (precursors) and events energies ε are power law distributed and that the exponents of these power laws depend on the load history and on the material. I...

متن کامل

Mixed-mode I/II Interlaminar Fracture of CF/PEI Composite Material

Failures in composite materials occur mainly due to interlaminar fracture, also called delamination, between laminates. This indicates that characterizing interlaminar fracture toughness is the most effective factor in the fracture of composite materials. This study reports investigation on mixed-mode interlaminar fracture behaviour in woven carbon fibre/polyetherimide (CF/PEI) thermoplastic co...

متن کامل

Influence of fibre-matrix interface on the fracture behaviour of carbon-carbon composites

This paper studies the fracture behaviour of unidirectional carbon fibre reinforced carbon matrix composites and its relation with the type of fibre-matrix interface developed in the composite. Model unidirectional carbon-carbon composites were prepared using the same type of fibre and different pitches as matrix precursors. These included both commercial pitches and synthesized in the laborato...

متن کامل

Study on the strengthening mechanisms and failure modes of the ultra-fine grained tri-modal Al5083-5wt. %B4C-Al2024 and Al5083-5 wt. %B4C-Al5083 composites

In this paper, the influence of Al2024 and Al5083 aluminum alloy coarse grains on mechanical properties and fracture mechanism of Al5083-B4C tri-modal composite has been discussed. Al5083 alloy powders with 5 wt. % of boron carbide were milled for 36 hours and 25 and 50 wt. % of coarse grain (CG) Al2024 and Al5083 powders were added to the milled powders and then hot press under argon atmospher...

متن کامل

آنالیز شکست پوسته­های استوانه­ای شیاردار تحت اثر انفجار داخلی به روش تحلیلی و شبیه سازی عددی

In this paper, a new method for fracture analysis of notched cylindrical cases under explosive loading of High Explosive internal charge has been presented to determine fracture time, fracture radius, fragment velocity and acceleration. Also the fracture dynamics has been simulated by explicit and nonlinear LS-DYNA code. In numerical simulation the behaviour of metallic case has been modeled by...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2002