Pi Autotuners Based on Biased Relay Identification
نویسندگان
چکیده
The paper describes an automatic tuning procedure for a wide class of continuous-time systems without and with time delays. Every auto-tuning method has two basic steps. The first one is experimental and yields an estimated model. The second step consists in a design procedure of controllers. The developed auto-tuning procedure identifies a first order estimation model obtained by a biased relay feedback test. The consecutive design is based on a general solution of Diophantine equations and results in a PI-like controller. Moreover, the Diophantine equation approach gives a scalar tuning parameter which is adjusted according to the equalization of weighted moments. Copyright © 2005 IFAC
منابع مشابه
Relay Identification by Analyzing Nonsymmetrical Oscillations for Single Integrator with Time Delay
Relay feedback test is very popular approach used in a commercial autotuners. The current research in this area was closely analyzed in (Tao Liu, Furong Gao 2009). There are two types of relay tests, unbiased and biased. When using the unbiased test the process gain can be highly deflorated by a load disturbance. Many relay feedback methods have been proposed to reject static disturbances (Hang...
متن کاملSimple Model-based Pid Autotuners with Rapid Relay Identification
Based on some relationships between modeland relay-based PI/PID tuning, some very simple synthesis procedures are proposed that couple the advantages of model-based methods to the simplicity and clarity of relay experiments. These procedures are fast, as they employ a single relay test, and do not introduce large process upsets. They are also very light from the computational standpoint, thus w...
متن کاملSmith Predictor Based Autotuners for Time-delay Systems
This paper presents a set of autotuners for single input-output systems with time delay. Autotuners represent a combination of relay feedback identification and some control design method. In this contribution, models with up to three parameters are estimated by means of a single asymmetrical relay experiment. Then a stable low order transfer function with a time delay term is identified. Contr...
متن کاملPID'12 Paper Clara
The paper presents theoretical insights which might lead to further development of improved relay-based PID autotuners. The analysis is based on the first generation of autotuners, namely the widely used Åström-Hägglund relay-feedback tuner. The analysis is accompanied by illustrative examples. The performance of the autotuners is evaluated against a reference PID controller which is designed u...
متن کاملAutotuning Principles for Time-delay Systems
This paper presents a set of single input – output (SISO) principles for tuning of continuous-time controllers used in autotuning schemes. The emphasis of designed autotuners is laid to SISO systems with time delay. Autotuners represent a combination of relay feedback identification and some control design method. In this contribution, models with up to three parameters are estimated by means o...
متن کامل