Limit Cycle of Induction Motor Drive and Its Control
نویسندگان
چکیده
Limit cycle oscillations of rotor speed are substantially caused by inverter’s dead time, when an induction motor (IM) drive operates in low frequency condition. In this paper, without any hardware modification, discontinuous PWM (DPWM3) modulate strategy possibly controls the unfavorable rotor speed limit cycle under no load operation condition. Simulated results are presented to demonstrate the effectiveness. key words: IM drive, limit cycle, DPWM3, control of limit cycle
منابع مشابه
Increasing the Efficiency of the Power Electronic Converter for a Proposed Dual Stator Winding Squirrel-Cage Induction Motor Drive Using a Five-Leg Inverter at Low Speeds
A dual stator winding squirrel-cage induction motor (DSWIM) is a brushless single-frame induction motor that contains a stator with two isolated three-phase windings wound with dissimilar numbers of poles. Each stator winding is fed by an independent three-phase inverter. The appropriate efficiency of this motor is obtained when the ratio of two frequencies feeding the machine is equal to the r...
متن کاملImplementation of a Novel Brushless DC Motor Drive based on One-Cycle Control Strategy
In this paper, one-cycle control (OCC), as a constant-frequency PWM control strategy for current control of a six-switch brushless dc (BLDC) motor drive is investigated. Developed current regulator is a unified controller and PWM modulator. Employing the one-cycle control strategy, decreases the torque ripple resulted from the conventional hysteresis current controllers and therefore, the vibra...
متن کاملA Current-Based Output Feedback Sliding Mode Control for Speed Sensorless Induction Machine Drive Using Adaptive Sliding Mode Flux Observer
This paper presents a new adaptive Sliding-Mode flux observer for speed sensorless and rotor flux control of three-phase induction motor (IM) drives. The motor drive is supplied by a three-level space vector modulation (SVM) inverter. Considering the three-phase IM Equations in a stator stationary two axis reference frame, using the partial feedback linearization control and Sliding-Mode (SM) c...
متن کاملA New Multi-Objective Optimization Method Based on Genetic- Fuzzy Algorithm and its Application in Induction Motor Speed Control
In this paper, a new method based on genetic-fuzzy algorithm for multi-objective optimization is proposed. This method is successfully applied to several multi-objective optimization problems. Two examples are presented: the first example is the optimization of two nonlinear mathematical functions and the second one is the design of PI controller for control of an induction motor drive supplie...
متن کاملRobust Backstepping Control of Induction Motor Drives Using Artificial Neural Networks and Sliding Mode Flux Observers
In this paper, using the three-phase induction motor fifth order model in a stationary twoaxis reference frame with stator current and rotor flux as state variables, a conventional backsteppingcontroller is first designed for speed and rotor flux control of an induction motor drive. Then in orderto make the control system stable and robust against all electromechanical parameter uncertainties a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- IEICE Transactions
دوره 88-A شماره
صفحات -
تاریخ انتشار 2005