Active vibration cancellation of tonal disturbance using orthogonal eigenstructure control
نویسندگان
چکیده
Orthogonal Eigenstructure Control (OEC) is a novel control method that can be used for active vibration cancellation. OEC is an output feedback control method applicable to multiple-input, multiple-output linear systems. In this paper, application of OEC for active vibration cancellation in a plate is presented. A steel plate clamped at four edges is used as a test plate and piezoelectric actuators are used as control actuators. Accelerometers are used for measuring the acceleration and displacement at ten locations on the plate. A tonal disturbance with a frequency of 150 Hz is applied to the plate by an electromagnetic actuator. After identification of the state-space model of the plate, orthogonal eigenstructure control is used to find the control gains that decouple the modes of vibrations and reduce transferring of vibrational energy between them. The results show significant vibration suppression throughout the plate.
منابع مشابه
A review on eigenstructure assignment methods and orthogonal eigenstructure control of structural vibrations
This paper provides a state-of-the-art review of eigenstructure assignment methods for vibration cancellation. Eigenstructure assignment techniques have been widely used during the past three decades for vibration suppression in structures, especially in large space structures. These methods work similar to mode localization in which global vibrations are managed such that they remain localized...
متن کاملExperimental application of orthogonal eigenstructure control for structural vibration cancellation
Orthogonal eigenstructure control (OEC) is a novel feedback control that is applicable to linear systems. Orthogonal eigenstructure control can minimizes the trial and error by the controller designer. It finds orthogonal vectors to some targeted modes of the structure within the achievable eigenvector set. When the targeted modes are replaced with the orthogonal vectors, it results in a decoup...
متن کاملActuators’ Locations in Vibration Cancellation of a Plate Using Orthogonal Eigenstructure Control
Orthogonal eigenstructure control is a novel control method that recently has been developed by the authors as a method for active vibration cancellation. This method is a feedback control method, which is applicable to linear multi-input multi-output systems. The remarkable advantage of this method over most of the eigenstructure assignment methods is that it neither needs pole placement nor e...
متن کاملVibration Cancellation in a Plate Using Orthogonal Eigenstructure Control
Orthogonal eigenstructure control is a novel control method that can be used for vibration suppression in flexible structures. The method described in this study does not need defining the desired locations of the closed-loop poles or predetermining the closed-loop eigenvectors. The method, which is applicable to linear multi-input multi-output systems, determines an output feedback control gai...
متن کاملA Novel Cancellation Path Modeling Signal for Active Noise Control
A new on-line cancellation path modeling signal for active noise control is proposed in this paper. The signal is based on the spectrum of the disturbance signal, and is especially useful for the cancellation path modeling in active noise control when the disturbance signal is tonal. It is shown that using the proposed signal as the perturbation signal in modeling can significantly reduce the m...
متن کامل