Relative biocompatibility of micro-hybrid and nano-hybrid light-activated composite resins
نویسندگان
چکیده
Background. In vitro studies have revealed a direct association between resin content and cytotoxicity of composite resins; however, implantation studies in this regard are sparse. This study investigates the relationship between filler content of composite resins and biocompatibility. Methods. This research employed twelve 180‒200-gr male Wistar rats, 1 nano-hybrid (Prime-Dent Inc.) and 1 micro-hybrid (Medental Inc.) composite resins containing 74% and 80‒90% filler content, respectively. The samples were assessed on the 2nd, 14th and 90th day of implantation. Four rats were allocated to each day in this experimental study. A section of 1.5mm long cured nano-hybrid and micro-hybrid materials were implanted into the right and left upper and lower limbs of the rats, respectively. Eight samples were generated on each day of observation. Inflammation was graded according to the criteria suggested by Orstavik and Major. Pearson's chi-squared test was employed to determine the relationship between the tissue responses of the two materials. Statistical significance was set at P < 0.05. Results . The average grade of inflammation for the nano-hybrid on the 2nd day of implantation was 3.3. The micro-hybrid resin had a score of 3.0 for cellular inflammation. On the 14th day, the micro-hybrid resin also exhibited a lower average grade for cellular inflammation. On the 90th day, the micro-hybrid resin had a higher grade of inflammation (0.9) compared to 0.3 recorded for nano-hybrid. The composite resins with higher filler content elicited a significantly lower grade of inflammation irrespective of the duration (χ=20.000, df=8, P=0.010) while the composite resins with lower filler content elicited a significantly lower inflammatory response on the 90th day (χ=4.000, df=1, P=0.046). Conclusion. The composite resins with higher filler content generally elicited significantly lower grades of inflammation, and the composite resins with lower filler content exhibited significantly lower inflammatory response on the 90th day of implantation.
منابع مشابه
اثر جهت نوردهی بر ریزنشت دو نوع کامپازیت مایکروفیلد و هایبرید
Introduction: One of the most important factors affecting the marginal seal of composite restorations is polymerization shrinkage. The aim of this study was to evaluate the micro leakage of two resin composites cured with two light directions. Methods: In this experimental study, forty similar class III preparations were prepared in 40 human anterior teeth. The teeth were randomly divided in t...
متن کاملبررسی درجه تبدیل کامپوزیتهای میکروهیبرید، نانوهیبرید و Ormocer با استفاده از سیستمهای نوردهی LED وQTH
Background and Aims: The aim of this study was to measure the degree of conversion (DC) of three types of composite resins (micro-hybrid, nano-hybrid and Ormocer) with different light curing units (LED LCU and QTH LCU) in two depths. Materials and Methods: Three commercially available dental resin composites were used in this study: (Tetric Ceram, Ivoclar Vivadent, Liechtenstein-A2 shade), (Te...
متن کاملEvaluation of Polymerization Efficacy in Composite Resins via FT-IR Spectroscopy and Vickers Microhardness Test
Background and aims. Polymerization efficacy affects the properties and performance of composite resin restorations.The purpose of this study was to evaluate the effectiveness of polymerization of two micro-hybrid, two nano-hybrid and one nano-filled ormocer-based composite resins, cured by two different light-curing systems, using Fourier transformation infrared (FT-IR) spectroscopy and Vicker...
متن کاملIn-vitro Comparison of the Impact of Four Types of Resin Composite on the Repaired Bond Strength and Surface Roughness After Sandblasting
Abstract Background and Aim: One of the major problems with resin composite restorations is the weakness of bonding between the new and aged composites. Since appropriate micromechanical retention is necessary for the repair of aged resin composite restorations, the level of surface roughness after sandblasting can be influential in this regard. Considering the diverse composition of avail...
متن کاملComparison of the effect of two mouthwashes with alcohol and without alcohol on microhardness changes of two types of composite resins(in vitro)
Abstract Background & Aim: Considering the widespread use of composite restorations and the provision of nanocomposites on one side and the common use of mouthwashes, there are concerns about the microhardness of composites and their known complications following mouthwashes. So, the present study was aimed to compare the effect of two mouthwash with alcohol and without alcohol on microhardness...
متن کامل