In Situ Monitoring of Iii-v Processing
نویسنده
چکیده
Fabrication of high performance III-V devices and integrated circuits depends on careful control of layer thicknesses and compositions in the as-grown epitaxial layers and in the etching of these layers. The relatively high value of compound semiconductor devices (compared with high-volume Si devices) makes the use of advanced process control (with expensive in situ sensors) potentially advantageous. Considerable attention has been given to the problems of realtime feedback control of MBE growth systems. In this paper, I will discuss experiences with use of both in situ and ex situ monitors for controlling reactive ion etching (RIE) of III-V materials. Specific examples from an electron cyclotron resonance (ECR) RIE base contact etch from an AlInAs/GaInAs HBT process will be given. The relative merits of reflection-based wafer sensors vs. process state sensors (optical emission spectroscopy and mass spectroscopy) will be discussed. The unique opportunities and problems associated with the III-V materials and required etch processes will be contrasted to implementation of advanced wafer state endpoint detection schemes in Si and flat panel display processes. Specific problems and solutions from our research which I will discuss include chamber seasoning effects on the drift of optical emission based endpoint detection schemes and signal processing techniques for accounting for this drift, modeling of the optical dielectric function of the compounds of interest vs. composition, and the effects of surface roughness on optical thickness measurements.
منابع مشابه
Ultrasound Assisted In Situ Esterification of Rubber Seeds Oil for Biodiesel Production (RESEARCH NOTE)
Since the conventional esterification method requires longer processing time and obtain low yield, the intensification of this process is still interesting subject to be investigated. To reduce the oil extraction cost from seeds which almost 70% of total processing cost, in situ esterification has been recently introduced. The objective of study was to produce biodiesel from rubber seeds oil th...
متن کاملCr (VI)/Cr (III) SPECIATION BY IN SITU ELECTRODEPOSITION ONTO TUBE PRIOR TO ELECTROTHERMAL ATOMIC ABSORPTION SPECTROMETRY
متن کامل
X-Ray in-situ saturation monitoring, an aid to study relative permeability in water-wet carbonate rocks
The simultaneous flow of oil and water in porous media is described by relative permeability curves, mainly derived from laboratory experiments. Relative permeability is of paramount importance in predicting reservoir production performance and drive mechanisms and its value depends largely on the volume fraction of fluids present in the test samples. Nowadays X-ray scanners are one of the most...
متن کاملThe Effect of Heat Treatment on the Microstructure and Mechanical Properties of Al/Al3Zr + Al3Ti In-situ Hybrid Composite Fabricated by Friction Stir Processing
In this research, an in-situ hybrid composite reinforced by Al3Zr and Al3Ti aluminide particles was fabricated by friction stir processing (FSP). The base metal was in the form of a rolled Al 3003-H14 alloy sheet, and zirconium and titanium metal powders were used as the reinforcements. Six passes of FSP were applied. Tensile strength and hardness of the base metal, as well as FSPed samples bef...
متن کاملManaging in situ gold concentrations in placers
In studying of the in situ gravitational concentration process part feature for placer, the technological ability to transform the in situ massif placer structure is evident. The two main processes involved in altering the massif in situ have been examined and outlined in detail. The in situ disintegration of massif material results in a new massif gravitational stratification structure. Regula...
متن کامل