On the Transformation of a Floating Resistor Oscillator to Grounded Passive Element Oscillators
نویسنده
چکیده
A generalization method is used to transform a floating resistor oscillator circuit to a family of sixteen grounded capacitor oscillators using the current conveyor (CCII) or the inverting current conveyor (ICCII) or combination of both. Two of the oscillator circuits have a floating property. A new family of sixteen oscillator circuits is generated from the known circuit using the adjoint circuit theorem. It is also shown that the oscillator under consideration leads to the generation of other known and new grounded passive element oscillators employing the differential voltage current conveyor (DVCC) and the balanced output current conveyor (BOCCII).
منابع مشابه
Generation of oscillators Based on Grounded capacitor Current Conveyors with Minimum Passive Components
In this paper, eight new Frequency Dependent Negative Resistance (FDNR) circuits using two current conveyors or inverting current conveyors or a combination of the two types are introduced. The proposed circuits are canonic and they use two grounded capacitors and one floating resistor. The generation of grounded capacitor minimum passive component oscillators from the FDNR circuits is also con...
متن کاملNovel Floating General Element Simulators Using CBTA
In this study, a novel floating frequency dependent negative resistor (FDNR), floating inductor, floating capacitor and floating resistor simulator circuit employing two CBTAs and three passive components is proposed. The presented circuit can realize floating FDNR, inductor, capacitor or resistor depending on the passive component selection. Since the passive elements are all grounded, this ci...
متن کاملElectronically Tunable Current-mode Multiphase Sinusoidal Oscillator Employing CCCDTA-based Allpass Filters with Only Grounded Passive Elements
This study describes the design of a multiphase sinusoidal oscillator (MSO) using CCCDTA-based allpass filters with grounded capacitors. The oscillation condition and oscillation frequency can be electronically/orthogonally controlled. The proposed MSO provides 2n (n 2) phase signals that are equally spaced in phase and equal amplitude. The circuit requires one CCCDTA, one electronic resistor...
متن کاملA Current-Mode Single-Resistance-Controlled Oscillator Employing VDCC and All Grounded Passive Elements
Realization of a novel single-resistance-controlled oscillator, employing an active element and all grounded passive elements, is the purpose of this manuscript. With requirements for completing the design being only a single Voltage Differencing Current Conveyor and four grounded passive components, it is also a preferable choice for integrated circuit implementation. The designed circuit has ...
متن کاملSimple Floating Immittance Simulator Using Single DVCCTA
This paper presentes a simple floating immittance simulation circuit employing only one differential voltage current conveyor transconductance amplifier (DVCCTA) and two grounded passive components. The proposed floating simulator circuit can realize floating inductor, capacitor or resistor depending on the passive element selection. The equivalent value of the realized simulator can be tuned e...
متن کامل