Study of AC Losses in Superconducting Electrical Components for Electrical System Design
نویسندگان
چکیده
In order to study the viability of coreless AC coupled coils, a superconductor transformer based on BSCCO-2223 PIT tapes was constructed. To achieve the minimum flux leakage, a toroidal geometry was selected. Both secondary and primary coils were wound around a glass fiber reinforced epoxy torus, obtaining a solid system. The field inside the transformer, the coupling factor, and the losses in the system were computed and measured, providing suitable parameters for new improvements in these systems.
منابع مشابه
The Impact of Superconducting Fault Current Limiter Locations on Voltage Sag in Power Distribution System
In this paper, the impacts of installing superconducting fault current limiter (SFCL)in radial and loop power distribution system are evaluated to improve voltage sag in both cases of with and without distributed generations (DG). Among various SFCLs, the hybrid type with a superconducting element in parallel with a current limiting reactor (CLR) is selected. This is more effective than resisto...
متن کاملA Hybrid Switching Technique for Single-Phase AC-Module PV System to Reduce Power Losses and Minimize THD
This paper proposes a hybrid switching technique for a domestic PV system with AC-module architecture. In this PV system, independent control of PV modules, which are directly connected to DC terminals of a single-phase cascaded multilevel inverter, makes module-level MPPT possible to extract maximum available solar energy, especially in partial shading conditions. As one of the main contributi...
متن کاملAn Optimal Design Approach for Resistive and Inductive Superconducting Fault Current Limiters via MCDM Techniques
The design process of a superconducting current limiter (SFCL) requires simulation and definition of its electrical, magnetic and thermal properties in form of equivalent circuits and mathematical models. However, any change in SFCL parameters: dimension, resistance, and operating temperature can affect the limiting mode, quench time, and restore time. In this paper, following the simulation of...
متن کاملTwo New and Novel Cascaded Multilevel Inverters with Less Number of Components Utilizing Series Submultilevel Inverters
In this paper, two new cascaded inverters are proposed, by using the series connection of new Submultilevel inverters. Each of the proposed Submultilevel inverters consists of three batteries and eight power switches. Four algorithms are presented to determine the voltages of these batteries for each of the proposed structures. In this study the comparison between the proposed structures with c...
متن کاملSimultaneous Placement of Capacitor and DG in Distribution Networks Using Particle Swarm Optimization Algorithm
Nowadays, using distributed generation (DG) resources, such as wind and solar, also improving the voltage profile in distribution companies has been considered. As optimal placement and sizing of shunt capacitors become more prevalent, utilities want to determine the impact of the various capacitors placement in distribution systems. Locating and determining the optimal capacity of shunt capaci...
متن کامل