Magnetothermopower and magnetoresistance of single Co-Ni/Cu multilayered nanowires

نویسندگان

  • Tim Böhnert
  • Anna Corinna Niemann
  • Ann-Kathrin Michel
  • Svenja Bäßler
  • Johannes Gooth
  • Bence G. Tóth
  • Katalin Neuróhr
  • László Péter
  • Imre Bakonyi
  • Victor Vega
  • Victor M. Prida
  • Kornelius Nielsch
چکیده

The magnetothermopower and the magnetoresistance of single Co-Ni/Cu multilayered nanowires with various thicknesses of the Cu spacer are investigated. Both kinds of measurement have been performed as a function of temperature (50 K to 325 K) and under applied magnetic fields perpendicular to the nanowire axis, with magnitudes up to -15 % at room temperature. A linear relation between thermopower S and electrical conductivity σ of the nanowires is found, with the magnetic field as an implicit variable. Combining the linear behavior of the S vs. σ and the Mott formula, the energy derivative of the resistivity has been determined. In order to extract the true nanowire materials parameters from the measured thermopower, a simple model based on the Mott formula is employed to distinguish the individual thermopower contributions of the sample. By assuming that the non-diffusive thermopower contributions of the nanowire can be neglected, it was found that the magnetic field induced changes of thermopower and resistivity are equivalent. The main emphasis in the present paper is put on a comparison of the magnetoresistance and magnetothermopower results and it was found that the same correlation is valid between the two sets of data for all samples, irrespective of the relative importance of the giant magnetoresistance or anisotropic magnetoresistance contributions in the various individual nanowires.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Magnetic Properties and Structural Study of Ni-Co/Cu Multilayers Prepared by Electrodeposition Method

Ni-Co/Cu multilayers have been grown by electrodeposition method from a single electrolyte (based on Ni(SO4).6H2O, Co(SO4).7H2O, Cu(SO4) and H3BO3) using galvanostatic control on titanium sublayers. The X-ray diffraction (XRD) patterns confirmed the multilayered structure with the nanometer thicknesses. Also, electron diffraction x-ray (EDX)  analysis confirmed the purity of deposited samples. ...

متن کامل

Perpendicular giant magnetoresistance of electrodeposited Co/Cu-multilayered nanowires in porous alumina templates

The giant magnetoresistance GMR of multilayered Co/Cu nanowires potentiostatically electrodeposited inside the pores of an anodized alumina template was studied in the current perpendicular to the plane CPP geometry. The maximum magnetoresistance change of 13.5% was observed for Co 8 nm /Cu 10 nm nanowires at room temperature. The interfacial roughness and/ or an intermixing between Co and Cu l...

متن کامل

Fabrication of Functional Metallic Nanowires Using Electrodeposition Technique

The array of numerous metallic nanowires with straight shape has much attention due to their shape anisotropy and extremely large surface area. This unique structure can be applied to develop the novel functional nano-materials such as electronic, magnetic and optical nano-scale devices. Metallic nanowires can be fabricated by manipulating metallic atoms one by one using a scanning tunneling mi...

متن کامل

ساخت و مطالعه نانوسیمهای آلیاژی CoCu و NiCu

In this work, NiCu and CoCu alloy nanowires were prepared by electrodeposition within nuclear track-etched polycarbonate membranes with the nominal diameter of 30nm. Electrodeposition was carried out under potentiostatic control with three electrodes. In order to grow CoCu nanowires and NiCu nanowires, an electrolyte containing salts of Co and Cu, and an electrolyte containing the salts of Ni...

متن کامل

Fabrication of Co/Cu Multilayered Nanowires Using a Pulsed Current Deposition Technique

Co/Cu multilayered nanowires were electrochemically fabricated using a pulsed current deposition technique into a nanochannel template. Time-dependence of deposition current was monitored to determine the growth rate of Co and Cu nanowires. Co layer and Cu layer thicknesses were adjusted to several tens nanometers, by controlling the deposition times. With decreasing the each layer thickness, t...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2014