Effect of Pre - Heat - Treatment on Kinetics of Graphitization

نویسندگان

  • Michio INAGAKI
  • Yoshio MURASE
چکیده

it to 680•Ž in flowing nitrogen (PV-7). Four samples having different pre-heat-treatment conditions were selected; the original coke PV-7 , the second one prepared from PV-7 by the heat treatment at 1500•Ž for 60 min (PV-15) , the third also from PV-7 by the treatment at 2060•Ž for 60 min (PV-7-20) , and the fourth by the heat treatment of PV-15 at 2060•Ž for 60 min (PV-15-20). Each sample was heat-treated in a high purity graphite crucible at temperatures ranging from 1800•Ž to 2400•Ž for a variety of residence time under reduced

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effect of Graphitization on Solid State Bonding of Carbon to Nickel*

Five carbons with different graphitization degrees, which were heat-treated at temperatures of 1273 to 3273K, were prepared. These carbons were bonded to nickel in a vacuum, using an RF-induction furnace, with joining temperatures of 1073 to 1273K. On the basis of the results of these experiments, the effects of the graphitization degree on the solid-state bonding of carbon to nickel were exami...

متن کامل

The effect of quenching media and annealing temperature on graphitization transformation kinetic of CK100 tool steel

In this research, graphitization transformation of a commercial hypereutectoid steel called CK100 was studied by the dilatometric experiments at the range of 600 – 700 °C from prior martensitic structure. Also the effect of quenching media on the initial graphitization time and completion of transformation has been discussed. Also, graphitization transition from the different prior microstructu...

متن کامل

Catalytically Graphitized Electrospun Carbon Nanofibers Adorned with Nickel Nanoparticles for Catalysis Applications

Catalytically graphitized electrospun carbon nanofibers adorned uniformly with fine nickel nanoparticles were successfully prepared. The procedure was based on the electrospinning technique and the use of nickel precursor to create both graphitized nanofibers and nickel nanoparticles under a relatively low-temperature heat treatment. The X-ray diffraction and Raman results clearly proved cataly...

متن کامل

The Influence of Heat-Input on Structural and Mechanical Properties of 2205 Duplex Stainless Steel

The influence of heat-input and pre-heat treatment on the structure, mechanical and corrosion behaviors of 2205 duplex stainless steel joint by means of GMAW process was the goal of this study. In this regards, the welding process was done using different heat input in the range of 0.6 to 1.4 kJ/mm and different pre-heating treatments in the range of 25 to 100 oC. The microstructural properties...

متن کامل

The Influence of Heat-Input on Structural and Mechanical Properties of 2205 Duplex Stainless Steel

The influence of heat-input and pre-heat treatment on the structure, mechanical and corrosion behaviors of 2205 duplex stainless steel joint by means of GMAW process was the goal of this study. In this regards, the welding process was done using different heat input in the range of 0.6 to 1.4 kJ/mm and different pre-heating treatments in the range of 25 to 100 oC. The microstructural properties...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2010