A comparison of stick and slip contact conditions for a coated sphere compressed by a rigid flat
نویسندگان
چکیده
A finite element analysis is used to study the elastic-plastic contact of a coated sphere compressed by a rigid flat under the stick contact condition. This was done for a wide range of hard coating material properties and coating thicknesses. A comparison with the slip contact condition is presented in terms of the critical contact parameters (at yield inception) and plasticity evolution. Empirical expressions are provided for critical interferences of the first and second yield inceptions, in the coating and on the substrate side of the interface, respectively. An expression is also provided for the dimensionless coating thickness for optimal resistance to plasticity under the stick contact condition. Additionally, the relations between different contact parameters in the elastic-plastic regime are presented. In general, it was found that the contact condition has a negligible effect on the contact parameters, except for phenomena occurring close to the contact area.
منابع مشابه
A Contact Problem of an Elastic Layer Compressed by Two Punches of Different Radii
The elasticity mixed boundary values problems dealing with half-space contact are generally well resolved. A large number of these solutions are obtained by using the integral transformation method and methods based the integral equations. However, the problems of finite layer thicknesses are less investigated, despite their practical interests. This study resolves a quasi-stationary problem of...
متن کاملPlastic yield inception of an indented coated flat and comparison with a flattened coated sphere
The yield inception of a deformable hard coated half space indented by a rigid sphere is studied. The effect of coating thickness, sphere radius and material properties of both the coating and substrate on the critical contact parameters at yield inception is investigated. Dimensionless empirical expressions for the critical load, critical contact area and critical interference are derived as f...
متن کاملA Frictionless Bristle-Based Friction Model That Exhibits Hysteresis and Stick-Slip Behavior
We investigate the origins of stick-slip friction by developing an asperitybased friction model based on the frictionless and lossless contact between a body and a row of rigid, rotating bristles attached to the ground by torsional springs and dashpots. This model exhibits hysteresis and quasi-stick-slip friction. The hysteretic energy-dissipation mechanism is the sudden release of the compress...
متن کاملA Novel Tactile Sensor with Electromagnetic Induction and Its Application on Stick-Slip Interaction Detection
Real-time detection of contact states, such as stick-slip interaction between a robot and an object on its end effector, is crucial for the robot to grasp and manipulate the object steadily. This paper presents a novel tactile sensor based on electromagnetic induction and its application on stick-slip interaction. An equivalent cantilever-beam model of the tactile sensor was built and capable o...
متن کاملElastic-Plastic Contact Analysis of a Sphere and a Rigid Flat
An elastic–plastic adhesion model for a metallic deformable sphere pressed by a rigid flat is presented. Analytical dimensionless expressions for the local separation outside the contact area and for the adhesion force are provided covering a large range of interference values from a point contact to a fully plastic contact. Two main dimensionless parameters of the problem are identified and th...
متن کامل