All-polymer photonic crystal slab sensor.
نویسندگان
چکیده
An all-polymer photonic crystal slab sensor is presented, and shown to exhibit narrow resonant reflection with a FWHM of less than 1 nm and a sensitivity of 31 nm/RIU when sensing media with refractive indices around that of water. This results in a detection limit of 4.5 × 10(-6) RIU when measured in conjunction with a spectrometer of 12 pm/pixel resolution. The device is a two-layer structure, composed of a low refractive index polymer with a periodically modulated surface height, covered with a smooth upper-surface high refractive index inorganic-organic hybrid polymer modified with ZrO2based nanoparticles. Furthermore, it is fabricated using inexpensive vacuum-less techniques involving only UV nanoreplication and polymer spin-casting, and is thus well suited for single-use biological and refractive index sensing applications.
منابع مشابه
Design and simulation of a pressure sensor based on a two dimensional photonic crystal slab of PbMoO4
In this paper the design and three dimensions (3D) simulation of a photonic crystal (PC) pressure sensor is presented. The device is based on a 2D PC slab of PbMoO4. The simulations are based on finite element method (FEM) and finite-difference time-domain (FDTD) method and are done using CST STUDIO SUITE software. The sensitivity of the proposed sensor is calculated by considering the deformat...
متن کاملPlasmonic Photonic-Crystal Slabs: Visualization of the Bloch Surface Wave Resonance for an Ultrasensitive, Robust and Reusable Optical Biosensor
A one-dimensional photonic crystal (PhC) with termination by a metal film—a plasmonic photonic-crystal slab—has been theoretically analyzed for its optical response at a variation of the dielectric permittivity of an analyte and at a condition simulating the molecular binding event. Visualization of the Bloch surface wave resonance (SWR) was done with the aid of plasmon absorption in a dielectr...
متن کاملDesign and simulation of a highly sensitive photonic crystal temperature sensor based on a cavity filled with the distilled water
In this paper design and two dimensional (2D) simulation of a photonic crystal highly sensitive temperature sensor is presented. The 2D simulations are based on finite-difference time-domain (FDTD) method and are done using Rsoft software. The device is constructed using a cavity filled with the distilled water located in the center of the photonic crystal waveguide. The operation of the propos...
متن کاملDesign and simulation of D-shaped photonic crystal fiber plasmonic biosensor: Investigation of the effect of structural parameters on the amount of sensor
This article has no abstract.
متن کاملAnalysis of Protein Concentration Based on Photonic Crystal Ring Resonator
In this paper, homogeneous, wavelength shift biosensor is designed for sensing the protein concentration using two dimensional Photonic Crystal Ring Resonator (PCRR). The sensor is designed to monitor the protein concentration from 0% to 100%. The proposed sensor is composed of periodic Si rods embedded in an air host with a circular PCRR that is placed between the inline quasi waveguides. It i...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Optics express
دوره 23 13 شماره
صفحات -
تاریخ انتشار 2015