PDN Design Strategies: I. Ceramic SMT Decoupling Capacitors – What Values Should I Choose?
نویسندگان
چکیده
Emissions in aircraft communication and navigation bands are measured for the latest generation of wireless phones. The two wireless technologies considered, GSM/GPRS and CDMA2000, are the latest available to general consumers in the U.S. A base-station simulator is used to control the phones. The measurements are conducted using reverberation chambers, and the results are compared against FCC and aircraft installed equipment emission limits. The results are also compared against baseline emissions from laptop computers and personal digital assistant devices that are currently allowed to operate
منابع مشابه
Quantifying SMT Decoupling Capacitor Placement in DC Power-Bus Design for Multilayer PCBs
Noise on a dc power bus that results from device switching, as well as other potential mechanisms, is a primary source of many signal integrity (SI) and electromagnetic interference (EMI) problems. Surface mount technology (SMT) decoupling capacitors are commonly used to mitigate this power-bus noise. A critical design issue associated with this common practice in high-speed digital designs is ...
متن کاملESR and ESL of Ceramic Capacitor Applied to Decoupling Applications
Power distribution system noise affects computer product timing performance, signal integrity and electromagnetic interference. Between 1 MHz and 1 GHz, the primary means of reducing power distribution noise is with ceramic decoupling capacitors. To achieve a certain target impedance, it is important to characterize the ESR of ceramic decoupling capacitors as they directly determine the number ...
متن کاملIntroduction to Choosing MLC Capacitors For Bypass/Decoupling Applications
Methods to ensure signal integrity using decoupling capacitors have been the topic of many papers in the past as well as in the present. One can find equally many methods of decoupling as well. This paper will illustrate one of these established methods and introduce it in a theoretical sense using the most simplistic of terms. The paper will also describe the methods of the past (in slow speed...
متن کاملPower Line Communications over Power Distribution Networks of Microprocessors – Feasibility Study, Channel Modeling, and a Circuit Design Approach
(ABSTRACT) Power line communications (PLC) has been considered by utility companies for over a half century and for home networking in recent years. However, PLC at the IC level, or even at the PCB level, has not been investigated outside Dr. Ha's research group. This thesis investigates the feasibility of PLC over power distribution networks (PDNs) of advanced microprocessors. A PDN in an inte...
متن کاملHow to Choose & Place Decoupling Capacitors to Reduce the Cost of the Electronic Products
PCB designs, it becomes more challenging to manage clean power supplies. The number of decoupling capacitors used for a power delivery system keeps increasing as well. This causes two problems for board designers and layout engineers: 1) How to determine the numbers and the types of decoupling capacitors needed for a particular design; and 2) Where to place the selected capacitors on board. Wit...
متن کامل