Uddeholm Tool Steel for Die Casting

ثبت نشده
چکیده

This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as a warranty of specific properties of the products described or a warranty for fitness for a particular purpose. Classified according to EU Directive 1999/45/EC For further information see our " Material Safety Data Sheets ". CONTENTS Introduction 4 Demands on the die cast product 4 Aspects of die design 5 Die making 6 Die performance 10 Demands on die steel for die casting 12 Die economy 17 Product programme – General description 18 – Chemical composition 19 – Quality comparison 19 Steel and hardness recommendations 20 Selecting a tool steel supplier is a key decision for all parties, including the tool maker, the tool user and the end user. Thanks to superior material properties, Uddeholm's customers get reliable tools and components. Our products are always state-of-the-art. Consequently, we have built a reputation as the most innovative tool steel producer in the world. Uddeholm produce and deliver high quality Swedish tool steel to more than 100,000 customers in over 100 countries. Some markets are served by ASSAB, our wholly-owned and exclusive sales channel in Asia and in the Middle East. Together we secure our position as a world leading supplier of tool steel. Wherever you are in the manufacturing chain, trust Uddeholm to be your number one partner and tool steel provider for optimal tooling and production economy. Quite simply, it pays to go for a better steel.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Study of multilayer and multi-component coatings deposited using cathodic Arc technique on H-13 hot work steel for die-casting applications

Die casting process is used since long, but even today problems like erosion, corrosion, soldering and sticking affect die life. These dies undergo thermal cyclic loads from 70 oC to 600 oC during processing. Physical Vapor Deposition (PVD) hard coating can play an important role in such extreme applications. In the present work, we report the use of Chromium based multila...

متن کامل

High pressure die casting of Fe-based metallic glass

Soft ferromagnetic Fe-based bulk metallic glass key-shaped specimens with a maximum and minimum width of 25.4 and 5 mm, respectively, were successfully produced using a high pressure die casting (HPDC) method, The influence of die material, alloy temperature and flow rate on the microstructure, thermal stability and soft ferromagnetic properties has been studied. The results suggest that a stee...

متن کامل

Problems in Repair-welding of Duplex-treated Tool Steels

Castings of aluminum and plastics are of high importance in the industrial world. They are usually made using permanent metallic moulds for pressure die-castings and injection molding. Die-tools are usually produced from chromium maraging hot work tool steel and are heat treated to hardness between 29 and 48 HRC, 1-3 . Die life is a mayor factor of a die-casting process and it strongly affects ...

متن کامل

Improvement of Cleanness in Melt of Tool Steel by Control of Gas Bubbles And Electromagnetic stirring in the ladle during vacuum treatment

The first part of the project is mainly about changing of slag compositions and see it affect on the inclusions in the ladle furnace. The second part of the project is to study the influence of stirring (EMGAS) on the large inclusions in the steel by changing stirring conditions. The project has done at Uddeholm AB, Hagfors. First, the scrap is melted in ARC furnace then moved to the ladle de-s...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2009