Boron films produced by high energy Pulsed Laser Deposition
نویسندگان
چکیده
Micron-thick boron films have been deposited by Pulsed Laser Deposition in vacuum on several substrates at room temperature. The use of high energy pulses (>700 mJ) results in the deposition of smooth coatings with low oxygen uptake even at base pressures of 10 -4 -10 -3 Pa. A detailed structural analysis, by X-Ray Diffraction and Raman, allowed to assess the amorphous nature of the deposited films as well as to determine the base pressure that prevents boron oxide formation. In addition the crystallization dynamics has been characterized showing that film crystallinity already improves at relatively low temperatures (800 °C). Elastic properties of the boron films have been determined by Brillouin spectroscopy. Finally, micro-hardness tests have been used to explore cohesion and hardness of B films deposited on aluminum, silicon and alumina. The reported deposition strategy allows the growth of reliable boron coatings paving the way for their use in many technology fields.
منابع مشابه
Growth of adhesive cubic phase boron nitride films without argon ion bombardment
Previously, in situ bombardment of massive ions (Ar, Kr, etc.) was considered to be necessary for the formation of c-BN films. Because of the accumulated stress, bombardment of massive ions has led to the formation of c-BN films with poor adhesion. Here we show that c-BN films can be grown without involving bombardment of massive ions. This is achieved by using plasma-assisted pulsed-laser depo...
متن کاملMechanism for Low Temperature Growth of Boron Nitride Nanotubes
Selective growth of boron nitride nanotubes (BNNTs) was demonstrated by plasma-enhanced pulsed laser deposition (PE-PLD). Although PLD is a physical vapor deposition technique for the growth of boron nitride (BN) thin films, ion sputtering induced by the plasma can eliminate the formation of BN thin films and lead to the so-called total resputtering region, in which, a pure phase of BNNTs can b...
متن کاملBoron nitride thin films deposited by RF plasma reactive pulsed laser ablation as interlayer between WC–Co hard metals and CVD diamond films
Thin films of boron nitride have been obtained by reactive pulsed laser ablation of a boron target in the presence of a 13.56 MHz radio frequency nitrogen plasma. The films have been deposited at several substrate temperatures, using the on-axis configuration, on WC–Co cutting tools, after Co removal by chemical etching (HClyHNO or HFyHNO ). Diamond polycrystalline 3 3 films of increasing thick...
متن کاملDependence of Magnetic Properties on Laser Ablation Conditions for Epitaxial La_{0.6}Sr_{0.4}MnO_{3} Thin Films Grown by Pulsed Laser Deposition
Epitaxial La0:6Sr0:4MnO3 (LSMO) thin films were grown by pulsed laser deposition. Relationships between magnetic properties of LSMO epitaxial thin films and ablation conditions such as ablated spot area and total incident laser energy in a pulsed laser deposition technique were studied. Ablated spot area was controlled by changing the focus lens position and total laser energy. Epitaxial growth...
متن کامل