A Novel Quad-band Printed Antenna Design using a Multi-Slotted Patch for Cellular Communication
نویسندگان
چکیده
This article proposes a quad band patch antenna for mobile communication. The design requirements are to meet the 0.9 GHz, 1.8 GHz, 2.1 GHz and 2.45 GHz bands. The proposed antenna consists of a rectangular patch monopole printed antenna in which slotting technique is used to achieve multi band resonance. The Patch with three slotted lines generates four resonating frequencies to cover 0.9 GHz GSM band, 1.8 GHz DCS band, 2.1 GHz 3G band and 2.45 GHz ISM band. Slots are optimized to achieve proper quad band operation of the antenna. The proposed antenna is fed by using a 50 ohm microstrip line. The simulated results in terms of return loss, VSWR (<2) indicate the suitability of the antenna for mobile communication. The designed antenna is simulated using CST Microwave studio.
منابع مشابه
Modified Rectangular Patch Antenna Loaded With Multiple C Slots for Multiple Applications
A new multiple C-slotted microstrip patch antenna is proposed in the present study. A patch antenna is a wide-beam narrowband antenna. The microstrip patch antenna consists of a very thin metallic strip (patch) placed a small fraction of a wavelength above a ground plane. The patch can be designed in any possible shape and normally made of conducting materials such as copper or gold. This study...
متن کاملDual Band Slotted Patch Antenna for On/Off-body Communication
Body Centric Wireless Communication (BCWC) has been topic of much research in recent years. In this manuscript, a novel low-cost microstrip patch antenna is designed for on-/off-body communication with a dual-band operation. The proposed structure exhibits a monopole-like radiation pattern at 2.45 GHz and a broadside radiation at 4.8 GHz, simultaneously. Lateral dimensions of 42 mm × 46 mm and ...
متن کاملMulti Attribute Analysis of a Novel Compact UWB Antenna with Via-fed Elements for Dual Band Notch Function (RESEARCH NOTE)
A compact microstrip-fed antenna with dual notched bands is proposed. First, a simple basic configuration is presented for Ultra Wide Band (UWB) applications and then the dual band notched structure is extended from the UWB one. The basic structure of the UWB antenna consists of a simple square radiating patch and a ground plane with a wide square slot on back of the substrate. A semi-circle sh...
متن کاملNew Low Cost Printed Antenna CPW-Fed for Global Positioning System, Personal Communication System and Worldwide Interoperability for Microwave Access Band Applications (TECHNICAL NOTE)
This paper presents a new design of a CPW-Fed multi bands planar antenna. This antenna can be integrated easily with passive and active elements. The proposed antenna is suitable to operate for GPS, PCS and WiMAX bands. Its entire area is 52.3x52.6mm2 and is employed on an FR-4 epoxy substrate and fed by a 50 Ohm coplanar line. The antenna parameters have been analyzed and optimized by using AD...
متن کاملDesign and Miniaturization of a Novel Fractal Microstrip Antenna for UWB Applications
A novel printed octagonal fractal microstrip antenna with semi-elliptical ground plane is presented for ultra wide band applications. The proposed antenna has a compact size of 20×20×1 mm³. The measured result of the antenna exhibits the ultra wide band characteristics from 2/9 to 14/2 GHz. In this paper, reducing antenna’s size by 35%, the same results were achieved, while small dimension frac...
متن کامل