Fast Plasma Deposition of Carbon and Silicon Layers
نویسندگان
چکیده
منابع مشابه
MICROSTRUCTURAL STUDY OF SILICON NITRIDE WHISKERS PRODUCED BY NITRIDATION OF PLASMA-SPRAYED SILICON LAYERS
plasma-sprayed silicon layers have been used to produce silicon nitride layers with fibrous microstructure which optimizes fracture toughness and strength. SEM examination of the specimens shows that the surface is covered by fine needles and whiskers of Si3N4.In order to study the oxygen contamination effect as well as other contaminants introduced during spraying and nitridation processes, su...
متن کاملMulti-step Electrophoretic Deposition of α-Al2O3 Nanoparticles on Carbon Substrate (TECHNICAL NOTE)
in the present study, electrophoretic deposition (EPD) was used to obtain dense and crack-free layers of Al2O3 on carbon substrate. Microstructural study of the obtained layers by scanning electron (SEM) and optical microscopy (OM) approved that crack-free layers can be obtained by EPD technique. According to obtained results, isopropanol is a suitable media to obtian compact layers which is at...
متن کاملComparison study of catalyst nanoparticle formation and carbon nanotube growth: Support effect
A comparison study has been conducted on the formation of catalyst nanoparticles on a high surface tension metal and low surface tension oxide for carbon nanotube CNT growth via catalytic chemical vapor deposition CCVD . Silicon dioxide SiO2 and tantalum have been deposited as supporting layers before deposition of a thin layer of iron catalyst. Iron nanoparticles were formed after thermal anne...
متن کاملEffect of Aluminum on Microstructure and Thickness of Galvanized Layers on Low Carbon silicon-Free Steel
In hot dip galvanizing, several parameters such as chemical composition of coating bath, immersion time and surface roughness of specimens could affect microstructure and properties of coating. In this article, the effect of aluminum content, immersion time and surface roughness on structure and properties of alloy layers have been investigated. Specimens of low carbon silicon-free steel with d...
متن کاملUniform and selective CVD growth of carbon nanotubes and nanofibres on arbitrarily microstructured silicon surfaces
Carbon nanotubes (CNTs) and nanofibres (CNFs) are grown on bulk-micromachined silicon surfaces by thermal and plasma-enhanced chemical vapour deposition (PECVD), with catalyst deposition by electron beam evaporation or from a colloidal solution of cobalt nanoparticles. Growth on the peaked topography of plasma-etched silicon ‘micrograss’ supports, as well as on sidewalls of vertical structures ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2016