A doubly fed induction generator using back-to-back PWM converters supplying an isolated load from a - Electric Power Applications, IEE Proceedings-
نویسندگان
چکیده
A doubly fed induction generator (DFIG) designed to be driven at variable speed from a wind turbine and supplying an isolated load is presented. Two back-to-back PWM voltage-fed inverters connected between the stator and the rotor allow suband super-synchronous operation with low distortion currents. The load voltage is maintained at constant frequency and its magnitude is regulated through control of the stator flux of the generator. An auxiliary load is connected in parallel with the main load, and the auxiliary power is controlled to allow the DFIG to track the optimal wind turbine speed for maximum energy capture from the wind. An indirect stator-orientated vector control scheme is used to control the DFIG and this results in constant load voltage and frequency for variations in both load and wind speed. The techniques have been implemented and validated on a 7.5kW experimental rig.
منابع مشابه
Power Control of DFIG Using Back to Back Converters (PWM Technique)
Wind is one of the most widely used nonconventional sources of energy. A back-to-back PWM converter is used as the excitation power supply for the doubly fed induction generator (DFIG) wind power generation of variable speed constant frequency (VSCF).The Simulink model and control strategy of converter which is connected between rotor and grid is analyzed. Stator-flux oriented vector control ap...
متن کاملA Combined Vector and Direct Power Control for AC/DC/AC Converters in DFIG Based Wind Turbine
The doubly-fed generators (DFIG) have clear superiority for the applications of large capacity and limited-range speed control case due to the partially rated inverter, lower cost and high reliability. These characteristics enable the doubly-fed wound rotor induction machine to have vast applications in wind-driven generation.In this paper Combined Vector and direct power control (CVDPC) strate...
متن کاملDoubly fed induction generator uising back-to-back PWM converters and its application to variable- speed wind-energy generation
The paper describes the engineering and design of a doubly fed induction generator (DFIG), using back-to-back PWM voltage-source converters in the rotor circuit. A vector-control scheme for the supply-side PWM converter results in independent control of active and reactive power drawn from the supply, while ensuring sinusoidal supply currents. Vector control of the rotor-connected converter pro...
متن کاملReal-Time Simulation of Doubly Fed Induction Generator for Wind Turbine Applications
This paper describes a real-time simulator of wind turbine generator system suitable for controller design and tests. The simulated generator is a grid-connected doubly fed induction machine with back-to-back PWM voltage source vector control of the rotor. The simulator is based on RT-LAB real-time simulation platform that allows for easy model-to-real-time-target design from Simulink models. T...
متن کاملPredictive Control Strategy of Doubly Fed Induction Generator Using Back-to-back Converter
This paper discuss the configuration, operation and power flow control strategies of a doubly fed induction generator (DFIG) with back-to-back PWM converter for variable speed wind turbines. The mathematical model of the DFIG is taken as appropriate d-q reference frame and their performances are in terms of stator currents references tracking. In order to control the power flow of the network, ...
متن کامل