Disk-type Input Coupler with a Hom Damper for the Pls Storage Ring Cavity
نویسندگان
چکیده
A disk-type input coupler for the Pohang Light Source (PLS) storage ring cavity was fabricated and tested up to 60 kW. A coaxial adapter is required for this system which should have an exit for the loop coupling tubes. Since this input coupler can extract HOMs better than the cylinder-type one out of the cavity, a specially designed HOM absorber was implemented in the design of the adapter. A characteristic of the system is simulated by the HFSS code. The result of the simulation and a preliminary measurement will be presented.
منابع مشابه
HOM Suppression of the Cavities with Plunger Tuner by the Temperature Tuning
New storage ring cavity temperature system was successfully operated for the Pohang Light Source (PLS) and increased the stable maximum beam current up to 200 mA. The storage ring cavity for PLS has the plunger-type tuner which is controlled by the phase feedback loop to always tune the resonant frequency. Optimum temperature windows for the PLS cavities were obtained by intensive but tiresome ...
متن کامل800MHz CRAB CAVITY CONCEPTUAL DESIGN FOR THE LHC UPGRADE*
Abstract In this paper, we present an 800 MHz crab cavity conceptual design for the LHC upgrade. The cell shape is optimized for lower maximum peak surface fields as well as higher transverse R/Q. A compact coax-to-coax coupler scheme is proposed to damp the LOM/SOM modes. A two-stub antenna with a notch filter is used as the HOM coupler to damp the HOM modes in the horizontal plane and rejects...
متن کاملHOM/LOM Coupler Study for the ILC Crab Cavity*
The FNAL 9-cell 3.9GHz deflecting mode cavity designed for the CKM experiment was chosen as the baseline design for the ILC BDS crab cavity. The full 9cell CKM cavity including the coupler end-groups was simulated using the parallel eigensolver Omega3P and scattering parameter solver S3P. It was found that both the notch filters for the HOM/LOM couplers are very sensitive to the notch gap, whic...
متن کاملDesign Considerations for a Second Generation Hom-damped Rf Cavity*
The first generation of strongly HOM-damped RF cavities are now being operated with beam in accelerators with good success. We briefly review these designs and consider some factors in the design of a second generation HOM damped copper RF cavity suitable for use in high current storage rings such as linear collider damping rings, light sources and high luminosity colliders. We consider the pro...
متن کاملThe Interaction between a Beam and a Superconducting Cavity Module: Measurements in CESR and CESR-Phase III Goals*
Plans for the next generation of electron-positron colliders (B-factories and B-factory-like machines) call for high beam currents to produce luminosities of the order of 1033. To store these high currents in a machine, special attention must be paid to the interaction of the beam with discontinuities in the surrounding vacuum chamber. RF cavities are among the biggest perturbations in accelera...
متن کامل