European specifications for imprecision and inaccuracy compared with operating specifications that assure the quality required by US CLIA proficiency-testing criteria.

نویسندگان

  • J O Westgard
  • J J Seehafer
  • P L Barry
چکیده

Proposed and interim European quality specifications for imprecision and inaccuracy have been compared with the US CLIA total error criteria for proficiency testing (PT). To assess the relative demands of separate imprecision and inaccuracy specifications vs total error criteria, we derived the imprecision and inaccuracy that would be allowable if a testing process were to provide 90% assurance of achieving the analytical quality required by CLIA PT criteria. Charts of operating specifications (OPSpecs charts) were prepared for commonly used single-rule and multi-rule quality control procedures with 2 and 4 control measurements per run. Of the 23 tests studied, the proposed European specifications for imprecision and inaccuracy were more demanding than the CLIA requirements for 12 tests (albumin, alkaline phosphatase, amylase, calcium, chloride, creatinine, lactate dehydrogenase, lithium, magnesium, total protein, sodium, and thyroxine). The CLIA total error criteria were more demanding than the proposed European specifications for nine tests (alanine aminotransferase, aspartate aminotransferase, total bilirubin, cholesterol, creatine kinase, iron, triglycerides, uric acid, and urea nitrogen). Two tests (glucose, potassium) showed different requirements at different decision levels. Manufacturers and laboratory analysts need to compare these different quality specifications on a test-by-test basis to guide the development, selection, evaluation, and control of laboratory measurement procedures.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Cholesterol operational process specifications for assuring the quality required by CLIA proficiency testing.

Current U.S. governmental regulations and requirements for the quality of laboratory tests do not provide a consistent form, comparable numbers, or practical specifications for the routine operation of laboratory testing processes. For cholesterol, as an example, the Health Care Financing Administration provides an analytical performance criterion for proficiency testing to enforce the Clinical...

متن کامل

Allowable imprecision for laboratory tests based on clinical and analytical test outcome criteria.

The allowable imprecision for laboratory tests has been estimated from criteria based on clinical and analytical test outcome. The analytical outcome criteria studied are the Clinical Laboratory Improvement Amendments (CLIA) criteria for proficiency testing. The clinical outcome criteria are estimates of medically significant changes in test results taken from a study in the literature. The est...

متن کامل

Chartsof OperationalProcessSpecifications(“OPSpecsCharts”)for Assessingthe Precision,Accuracy,and QualityControlNeeded to SatisfyProficiencyTesting PerformanceCriteria

“Operational process specifications” have been derived from an analytical quality-planning model to assess the precision, accuracy, and quality control (QC) needed to satisfy Proficiency Testing (PT) criteria. These routine operating specifications are presented in the form of an “OPSpecs chart,” which describes the operational limits for imprecision and inaccuracy when a desired level of quali...

متن کامل

Comparison of NCEP performance specifications for triglycerides, HDL-, and LDL-cholesterol with operating specifications based on NCEP clinical and analytical goals.

The National Cholesterol Education Program (NCEP) performance specifications for methods that measure triglycerides, HDL-cholesterol, and LDL-cholesterol have been evaluated by deriving operating specifications from the NCEP analytical total error requirements and the clinical requirements for interpretation of the tests. We determined the maximum imprecision and inaccuracy that would be allowa...

متن کامل

Cholesterol--a model system to relate medical needs with analytical performance.

The evolution of cholesterol testing provides an example of a systematic approach that developed to relate the medical use of a laboratory test with the analytical performance requirements for that test. Laboratories today have the capability to perform cholesterol testing with the accuracy and precision necessary to meet medical needs. This statement can be made because (a) a standard diagnost...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Clinical chemistry

دوره 40 7 Pt 1  شماره 

صفحات  -

تاریخ انتشار 1994