Correction: Ono, K. Calibration Methods of Acoustic Emission Sensors. Materials 2016, 9, 508
نویسنده
چکیده
The author wishes to make the following corrections to this paper [1].[...].
منابع مشابه
Calibration Methods of Acoustic Emission Sensors
This study examined outstanding issues of sensitivity calibration methods for ultrasonic and acoustic emission transducers and provides workable solutions based on physically measureable quantities, laser-based displacement measurement in particular. This leads to mutually consistent determination of transmitting and receiving sensitivities of sensors and transducers. Methods of circumventing p...
متن کاملCluster Analysis of Acoustic Emission Signals for Carbon/Epoxy Composite in Four-point Bending Test (RESEARCH NOTE)
Due to the extensive use of composites in various industries and the fact that defects reduce ultimate strength and efficiency during operation, detection of failures in composite parts is very important. The aim of this paper is to use Acoustic Emission (AE) non-destructive method in four-point bending test of carbon/epoxy composite to analyze and examine the failure mechanisms. This method is...
متن کاملBar-Wave Calibration of Acoustic Emission Sensors
This study extended a bar-wave calibration method for acoustic emission (AE) sensors. It combined laser interferometer displacement measurements and the wave propagation medium of a long bar, excited at its end with an ultrasonic transducer driven by a pulser. Receiving bar-wave sensitivities of 16 types of AE sensors were measured and compared to their receiving sensitivities to normally incid...
متن کاملHealth Monitoring for Composite under Low-Cycle Cyclic Loading, Considering Effects of Acoustic Emission Sensor Type
Composites have been widely used in the aerospace industry. Due to the requirement of a high safety for such structures, they could be considered for health monitoring. The acoustic emission approach is one of most effective methods for identifying damages in composites. In this article, standard specimens were made from carbon fibers and the epoxy resin, with the [03/902/...
متن کاملAcoustic Emission in Materials Research – a Review
This paper reviews progress in methods of signal analysis used in acoustic emission (AE) as applied to materials research field. The achievement and inadequacy in understanding of AE from materials during the deformation, fracture and other processes are examined systematically. New goals for the future are also discussed in view of new analytical tools and vastly advanced instrumentation.
متن کامل