The Theoretical and Experimental Investigation into Technological Parameters of High-Melting Metal Arc Spraying
نویسندگان
چکیده
The experimental study is done for technological parameters of high-melting metal arc spraying to study the influence of spraying current, spraying voltage and wire feed voltage on spraying arc and the influence of spraying current on coating temperature and analyze theoretically the distribution rules of spray gun jet speed field and temperature field and their influencing factors. The results showed that the arc current increases along with arc voltage increase. The lower the spraying voltage is, the smaller the molten grain size becomes. However, if the arc voltage is lower than the minimum critical arc voltage of the material, the arc could not keep smooth burning. The spraying current has correspondence relationship with wire feed speed. The spraying current could be adjusted through wire feed speed adjustment.
منابع مشابه
ایجاد لایه سوپرآلیاژ بر روی فوم های نیکلی توسط عملیات پاشش گرمایی
Open pore metallic foams can be used for high temperature, high performance heat exchanger due to their high gas permeability and heat conductivity provided that skins properly attach to the foam’s struts on the surface. In the current study, a novel process was successfully developed to fill pores on the surface of the foam sheet in order to deposit skin on the foam specimens by thermal sprayi...
متن کامل1 Arc Plasma Torch Modeling
Arc plasma torches are the primary components of various industrial thermal plasma processes involving plasma spraying, metal cutting and welding, thermal plasma CVD, metal melting and remelting, waste treatment and gas production. They are relatively simple devices whose operation implies intricate thermal, chemical, electrical, and fluid dynamics phenomena. Modeling may be used as a means to ...
متن کاملشبیه سازی ذوب سیستمهای دو بعدی
The study of a two-dimensional (2-D) system started nearly half a century ago when Peierls and Landau showed the lack of long range translational order in a two-dimensional solid. In 1968, Mermin proved that despite the absence of long range translational order. Two-dimensional solids can still exhibit a different kind of long range bond orientation. During the last decade, fascinating theori...
متن کاملTheoretical and Experimental Investigation of SO2 Adsorption from Flue Gases in a Fluidized Bed of Copper Oxide
Among the air pollutants, sulfur dioxide has been given special emphasis for posing dangers to the environment. SO2 emissions in the air have harmful effects on human health and the environment. Respiratory diseases and exacerbation of heart diseases are among dangerous symptoms for human health, especially when high concentrations of SO2 are emitted. Therefore, in the present study, a wide var...
متن کاملPath Planning and Control of an Industrial Robot Used for Opening Tap Hole of an Electric Arc Furnace
The electric arc furnace (EAF) is one of the popular methods of steel production from steel scraps. The plasma arc is used in EAF to generate heat for melting scarp or direct reduced iron (DRI). The liquid metal is drained from the EAF through the tap hole. Nowadays, it is critical to use Automated/robotic tools for opening the tap hole with oxygen lancing. Because many workers have been blinde...
متن کامل