Assessment of Construction Cost Saving by Concrete Mixing the Activator Material
نویسندگان
چکیده
Studies which reduce cement usage, develop an alternative by partial replacement of cement with blast-furnace slag, fly ash, or such industrial byproducts, and evaluate the environmental load and economic value of concrete mixed with such are in high demand. In this study, A-BFS (Activator Blast Furnace Slag), which is mixed with an activator in order to induce early-age strength manifestation of BFS mixed concrete was used to execute a physical property evaluation of concrete. This study first conducted physical property tests for compression strength of concrete that partially replaced OPC (ordinary Portland cement) with A-BFS and executed a comparison/analysis with 100% OPC. It was thought that if concrete early strength is manifested through this process when applied to RC (Reinforced Concrete) building, at most a three to four day construction cycle would be possible, according to which the economic value of the construction period reduction was evaluated. For this evaluation, general apartment houses (Case 1) were taken as the evaluation subject, and for comparison, Cases 2, 3, and 4 were set up by the mix ratio of A-BFS, and the economic value evaluation range was established. As a result, it was found that Case 2 had no change from Case 1, while Case 3 saved about 106,654,762 KRW (Korea Won) and Case 4 saved about 159,982,143 KRW.
منابع مشابه
Assessment of Mechanical Properties of Concrete Containing Granite Slurry Waste (TECHNICAL NOTE)
The granite stone is the most widely used in the construction and granite slurry is generated through cutting and polishing of the stone. Granite slurry is waste material consisting of very fine powder and creats disposal and environmental problems in worldwide today. Disposal of granite waste leads to health hazards like respiratory and allergy problems to the people around. It also causes the...
متن کاملConcrete Mixing Methods and Concrete Mixers: State of the Art
As for all materials, the performance of concrete is determined by its microstructure. Its microstructure is determined by its composition, its curing conditions, and also by the mixing method and mixer conditions used to process the concrete. This paper gives an overview of the various types of mixing methods and concrete mixers commercially available used by the concrete industry. There are t...
متن کاملIdentification, classification, and evaluation of supply chain risks in concrete dams in terms of cost
Iran is one of the pioneers in dam construction, which dam construction considers one of the greatest industry in Iran. In addition, reducing water sources attract the attentions to dam construction. The process of dam construction, supply of materials, and related services need great financial sources, also dam construction is a time consuming process. Therefore, it is important paying attenti...
متن کاملLCA and Multi-Criteria Analysis of Fly Ash Concrete Pavements
Rapid industrialization results in increased use of natural resources bring along serious ecological and environmental imbalance due to the dumping of industrial wastes. Principles of sustainable construction have to be accepted with regard to the consumption of natural resources and the production of harmful emissions. Cement is a great importance raw material in the building industry and toda...
متن کاملEnergy Saving Analysis In Building Walls Through Thermal Insulation System
In this study, we discuss about the energy saving in different type of building walls by using optimum insulation thickness with suitable insulation material. The energy saving is maintained by reducing the energy consumption in buildings. Heat losses from building envelope have a major share in waste of energy. So it is essential to save the energy by using optimum insulation thickness. The in...
متن کامل