Free Vibration and Buckling of Cantilever Beams under Linearly Varying Axial Load Carrying an Eccentric End Rigid Body
نویسندگان
چکیده
Natural frequencies of a clamped axially loaded beam carrying an eccentric end rigid body are computed. A linearly varying non-follower axial force representing the beam’s own weight is taken into consideration. An analytical form of the frequency equation of the structure is obtained and solved numerically. The parameters associated with the end rigid body, the mass, the rotary inertia and the eccentricity, are shown to considerably affect the natural frequencies of the structure. The modified orthogonality conditions of the system are presented. A closed-form of the frequency equation for a beam under constant axial load carrying an eccentric end rigid body is obtained and results are compared with the distributed load case. Based on the exact and approximate computations of the critical buckling load a recommendation is made on the method of including the effect of distributed load for practical purposes.
منابع مشابه
Effect of shell axial deformation on flutter of cantilevered cylindrical shells under follower forces
Axial vibration effect of shell particles on dynamic stability of a cantilevered cylindrical shell under an axial follower force was addressed. In spite of free-ended shells, the reduced axial force under this effect cannot be derived analytically. Instead, an approximate method was proposed based on the fact that the static (and harmonic) axial deformation under an axial load in a free-ended b...
متن کاملSemi-analytical Approach for Free Vibration Analysis of Variable Cross-Section Beams Resting on Elastic Foundation and under Axial Force
in this paper, free vibration of an Euler-Bernoulli beam with variable cross-section resting on elastic foundation and under axial tensile force is considered. Beam’s constant height and exponentially varying width yields variable cross-section. The problem is handled for three different boundary conditions: clamped-clamped, simply supported-simply supported and clamp-free beams. First, the equ...
متن کاملStiffness Matrices for Axial and Bending Deformations of Non-Prismatic Beams with Linearly Varying Thickness
Siffness matrices for axial and bending deformations of a beam having a rectangular cross sectional area of constant width and linearly varying thickness are developed. A consistant load vector for a uniformly distributed lateral load is also calculated, using the principal of potential energy. The matrices are used to obtain numerical results for a variety of beams with non-uniform thickness t...
متن کاملBuckling Analysis of FGM Timoshenko Beam with Variable Thickness under Concentrated and Distributed Axial loads Using DQM
In this article, mechanical buckling analysis of tapered beams having constant width and variable thickness, made of two-dimensional functionally graded materials is studied. The beam is assumed to be made of metal and ceramic, where their volume fractions vary in both longitudinal and thickness directions based on the power law. The beam is generally subjected to combined concentrated and dist...
متن کاملA Nonlocal First Order Shear Deformation Theory for Vibration Analysis of Size Dependent Functionally Graded Nano beam with Attached Tip Mass: an Exact Solution
In this article, transverse vibration of a cantilever nano- beam with functionally graded materials and carrying a concentrated mass at the free end is studied. Material properties of FG beam are supposed to vary through thickness direction of the constituents according to power-law distribution (P-FGM). The small scale effect is taken into consideration based on nonlocal elasticity theory of E...
متن کامل