Flank milling with flat end milling cutters
نویسندگان
چکیده
In this paper, we give a detailed mathematical understanding of flank milling with flat end cutters, which we use to develop a method for milling with such a cutter. This method slides the cutter along two rails, providing two points of contact on the surface.
منابع مشابه
Hybrid ABC Optimized MARS-Based Modeling of the Milling Tool Wear from Milling Run Experimental Data
Milling cutters are important cutting tools used in milling machines to perform milling operations, which are prone to wear and subsequent failure. In this paper, a practical new hybrid model to predict the milling tool wear in a regular cut, as well as entry cut and exit cut, of a milling tool is proposed. The model was based on the optimization tool termed artificial bee colony (ABC) in combi...
متن کاملAnalytical Cutting Forces Model of Helical Milling Operations
Helical milling operations are used to generate or enlarge boreholes by means of a milling tool. The bore diameter can be adjusted through the diameter of the helical path. The kinematics of helical milling on a three axis machine tool is analysed firstly. The relationships between processing parameters, cutting tool geometry characters with machined hole feature are formulated. The feed motion...
متن کاملEmploying helical milling to Aluminium with MQL has shown in improvement in geometrical accuracy and a reduction inburr formation and lower cutting temperature and a smaller cutting force comparing to drilling operations
Helical milling operations are used to generate or enlarge boreholes by means of a milling tool. The bore diameter can be adjusted through the diameter of the helical path. The kinematics of helical milling on a three axis machine tool is analysed firstly. The relationships between processing parameters, cutting tool geometry characters with machined hole feature are formulated. The feed motion...
متن کاملCutting Kinematics Analysis in Hypocycloidal Tooth Milling of Cylindrical Gears
The hypocycloidal flanks of the cylindrical gear teeth have the flank lines defined by lengthened or shortened hypocycloid and the profile involute. The curved and bulged flanks have some advantages, among them being the increased strength in bending and controlled positioning of the contact imprint. The tooth flank generation has on the basis the application of the technological process of mil...
متن کاملAutomated tool sequence selection for 3-axis machining of free-form pockets
This paper describes an efficient method to find the lowest cost tool sequence for rough machining free-form pockets on a 3-axis milling machine. The free-form pocket is approximated to within a predefined tolerance of the desired surface using series of 2.5-D layers of varying thicknesses that can be efficiently removed with flat-end milling cutters. A graph-based method finds an optimal seque...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Computer-Aided Design
دوره 35 شماره
صفحات -
تاریخ انتشار 2003