An Analysis of Chaos via Contact Transformation
نویسنده
چکیده
Transition from chaotic to quasi-periodic phase in modified Lorenz model is analyzed by performing the contact transformation such that the trajectory in R is projected on R. The relative torsion number and the characteristics of the template are measured using the eigenvector of the Jacobian instead of vectors on moving frame along the closed trajectory. Application to the circulation of a fluid in a convection loop and oscillation of the electric field in single-mode laser system are performed. The time series of the eigenvalues of the Jacobian and the scatter plot of the trajectory in the transformed coordinate plane X −Z in the former and |X| − |Z| in the latter, allow to visualize characteristic pattern change at the transition from quasi-periodic to chaotic. In the case of single mode laser, we observe the correlation between the critical movement of the eigenvalues of the Jacobian in the complex plane and intermittency.
منابع مشابه
Conservative chaotic flow generated via a pseudo-linear system
Analysis of nonlinear autonomous systems has been a popular field of study in recent decades. As an interesting nonlinear behavior, chaotic dynamics has been intensively investigated since Lorenz discovered the first physical evidence of chaos in his famous equations. Although many chaotic systems have been ever reported in the literature, a systematic and qualitative approach for chaos generat...
متن کاملBifurcation and Chaos in Size-Dependent NEMS Considering Surface Energy Effect and Intermolecular Interactions
The impetus of this study is to investigate the chaotic behavior of a size-dependent nano-beam with double-sided electrostatic actuation, incorporating surface energy effect and intermolecular interactions. The geometrically nonlinear beam model is based on Euler-Bernoulli beam assumption. The influence of the small-scale and the surface energy effect are modeled by implementing the consistent ...
متن کاملConjugate and Directional Chaos Control Methods for Reliability Analysis of CNT–Reinforced Nanocomposite Beams under Buckling Forces; A Comparative Study
The efficiency and robustness of reliability methods are two important factors in the first-order reliability method (FORM). The conjugate choice control (CCC) and directional chaos control method (DCC) are developed to improve the robustness and efficiency of the FORM formula using the stability transformation method. In this paper, the CCC and DCC methods are applied for the reliability analy...
متن کاملNonlinear dynamic analysis of a four-bar mechanism having revolute joint with clearance
In general, joints are assumed without clearance in the dynamic analysis of multi-body echanical systems. When joint clearance is considered, the mechanism obtains two uncontrollable degrees of freedom and hence the dynamic response considerably changes. The joints’ clearances are the main sources of vibrations and noise due to the impact of the coupling parts in the joints. Therefore, the syst...
متن کاملA Contact Problem of an Elastic Layer Compressed by Two Punches of Different Radii
The elasticity mixed boundary values problems dealing with half-space contact are generally well resolved. A large number of these solutions are obtained by using the integral transformation method and methods based the integral equations. However, the problems of finite layer thicknesses are less investigated, despite their practical interests. This study resolves a quasi-stationary problem of...
متن کاملGrazing Bifurcations and Chaos of a Hydraulic Engine Mount
The constitutive relationships of the rubber materials that act as the main spring of a hydraulic engine mount are nonlinear. In addition to material induced nonlinearity, further nonlinearities may be introduced by mount geometry, turbulent fluid behavior, temperature, boundary conditions, decoupler action, and hysteretic behavior. In this research all influence the behavior of the system only...
متن کامل