Low Noise Amplifier Design and Optimization IV.1 CMOS LNA Design and Optimization Overview
ثبت نشده
چکیده
Low Noise Amplifier (LNA) is the most critical part of a receiver front end, in term of the receiver performance. Many circuits with different configurations have been proposed for LNA, in different applications. After choosing proper circuit for LNA, this circuit must be designed and optimized. Various techniques have been proposed for LNA design and optimizations. In this section an overview of available LNA circuits and design and optimization techniques will be overviewed.
منابع مشابه
Design and Fabrication of a 911 GHz Balanced Low Noise Amplifier Using HJFET
This paper describes the design of an X-band balanced low noise amplifier (LNA) using an available HJFET device. The balanced LNA consists of a pair of electrically similar transistors whose input and output signals are divided or combined by 3 dB two-stage Wilkinson power dividers. The proposed balanced LNA is fabricated and measured. The measured results show that the noise figure is 1.30 dB ...
متن کاملDesign and Optimization of a Very Low Noise Amplifier using Particle Swarm Optimization Technique
A b s t r a c t Keywords: Cascode Topology Low Noise Amplifier Noise Figure Particle Swarm Optimization Design of a LNA is a complex process. Because it involves various parameters and needs complex trade-offs. This paper presents an optimized design of a low noise amplifier (LNA) using particle swarm optimization (PSO) technique. The proposed LNA has a cascode structure with inductive source d...
متن کاملCMOS Low Noise Amplifier Design Optimization Techniques
This paper reviews and analyzes four reported low noise amplifier (LNA) design techniques applied to the cascode topology based on CMOS technology: classical noise matching (CNM), simultaneous noise and input matching (SNIM), powerconstrained noise optimization (PCNO), and power-constrained simultaneous noise and input matching (PCSNIM) techniques. Very simple and insightful sets of noise param...
متن کاملA Broadband Low Power CMOS LNA for 3.1–10.6 GHz UWB Receivers
A new approach for designing an ultra wideband (UWB) CMOS low noise amplifier (LNA) is presented. The aim of this design is to achieve a low noise figure, reasonable power gain and low power consumption in 3.1-10.6 GHz. Also, the figure of merit (FOM) is significantly improved at 180nm technology compared to the other state-of-the-art designs. Improved π-network and T-network are used to obt...
متن کاملA W-band Simultaneously Matched Power and Noise Low Noise Amplifier Using CMOS 0.13µm
A complete procedure for the design of W-band low noise amplifier in MMIC technology is presented. The design is based on a simultaneously power and noise matched technique. For implementing the method, scalable bilateral transistor model parameters should be first extracted. The model is also used for transmission line utilized in the amplifier circuit. In the presented method, input/output ma...
متن کامل