High performance Li-ion sulfur batteries enabled by intercalation chemistry.
نویسندگان
چکیده
The unstable interface of lithium metal in high energy density Li sulfur (Li-S) batteries raises concerns of poor cycling, low efficiency and safety issues, which may be addressed by using intercalation types of anode. Herein, a new prototype of Li-ion sulfur battery with high performance has been demonstrated by coupling a graphite anode with a sulfur cathode (2 mA h cm(-2)) after successfully addressing the interface issue of graphite in an ether based electrolyte.
منابع مشابه
Binder-free copper hexacyanoferrate electrode prepared by pulse galvanostatic electrochemical deposition for aqueous-based Al-ion batteries
Copper hexacyanoferrate (CuHCF) nanoparticles with tunnel-like Prussian blue structure were deposited on graphite substrate via pulse galvanostatic electrochemical deposition at 25 mA cm-2 with both on-time and off-time periods of 0.1 s, which presented the ability to intercalation/de-intercalation of Al ions reversibly in aqueous solution. The crystal structure of the as-prepared CuHCF f...
متن کاملHigh performance batteries based on hybrid magnesium and lithium chemistry.
This work studied hybrid batteries assembled with a Mg metal anode, a Li(+) ion intercalation cathode and a dual-salt electrolyte containing Mg(2+) and Li(+) ions. We show that such hybrid batteries were able to combine the advantages of Li and Mg electrochemistry. They delivered outstanding rate performance (83% capacity retention at 15 C) with superior safety and stability (~5% fade for 3000 ...
متن کاملDFT analysis of Li intercalation mechanisms in the Fe-phthalocyanine cathode of Li-ion batteries.
New materials with high intercalation capacity are needed for cathodic materials in order to overcome small capacities at high discharge rates in Li-ion batteries. High intercalation capacities have been reported in the experimental setup using iron phthalocyanine (FePc) as cathodic material; however the real intercalation capacity and the chemistry occurring during the intercalation process ar...
متن کاملImproving the performance of Lithium-Sulfur Batteries using Sulfur-(TiO2/SiO2) yolk–shell Nanostructure
Lithium-Sulfur (Li-S) batteries are considered as one of the promising candidates for next-generation Li batteries in near future. Although, these batteries are suffering from certain drawbacks such as rapid capacity fading during the charge and discharge process due to the dissolution of polysulfides. In this paper, Sulfur/metal oxide (TiO2 and SiO2) yolk–shell structures have been successfull...
متن کاملSnO2 Nanowires on Carbon Nanotube Film as a High Performance Anode Material for Flexible Li-ion Batteries
Today, Li-ion batteries (LIBs) are the most common rechargeable batteries used in electronic devices. SnO2 with theoretical specific capacity of 782 mAh/g is among the best anode materials for LIBs. In this report, Three-dimensional SnO2 nanowires (NWs) on carbon nanotube (CNT) thin film (SnO2 / CNT) is fabricated using a combination of vacuum filtration and thermal evaporation techniques. The ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Chemical communications
دوره 51 70 شماره
صفحات -
تاریخ انتشار 2015