Analysis of Shear Bands in Sand Under Reduced Gravity Conditions

نویسندگان

  • Jason P. Marshall
  • Ryan C. Hurley
  • Dan Arthur
  • Ivan Vlahinic
  • Carmine Senatore
  • Karl Iagnemma
  • Brian Trease
  • José E. Andrade
چکیده

The strength of granular material, specifically sand is of pivotal importance for understanding physical phenomena on other celestial bodies. However, relatively few experiments have been conducted to determine the dependence of strength properties on gravity. In this work, we experimentally investigated three measures of strength (peak, confined flow, and unconfined flow friction angle) in Earth, Martian, Lunar, and near-zero gravity. The angles were captured in a passive Earth pressure experiment conducted on a reduced gravity flight. The results showed no dependence of the peak friction angle on gravity, a weak dependence of the confined flow friction angle on gravity, and no dependence of the unconfined flow friction angle on gravity. These results highlight the importance of understanding strength and deformation mechanisms of granular material at different levels of gravity. Jason P. Marshall California Institute of Technology, Pasadena, CA, USA Ryan C. Hurley Lawrence Livermore National Laboratory, Livermore, CA 94550, USA Dan Arthur California Institute of Technology, Pasadena, CA, USA Ivan Vlahinic California Institute of Technology, Pasadena, CA, USA Carmine Senatore Massachusetts Institute of Technology, Cambridge, MA, USA Karl Iagnemma Massachusetts Institute of Technology, Cambridge, MA, USA Brian Trease University of Toledo, Toledo, OH, USA José E. Andrade California Institute of Technology, Pasadena, CA, USA

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

FE-Modeling of Shear Resistance Degradation in a Sand Body During Cyclic Shearing Under CNS Condition

The behaviour of dry and cohesionless sand body in a cyclic interface shear box test under a constant normal stiffness (CNS) condition is numerically studied. Do this end finite element calculations are carried out using a micro-polar hypoplastic model, where the mean grain diameter of the sand material is used as a characteristic length of the micro-structure. The constitutive equations for th...

متن کامل

Granular shear flow in varying gravitational environments

Despite their very low surface gravities, asteroids exhibit a number of different geological processes involving granular matter. Understanding the response of this granular material subject to external forces in microgravity conditions is vital to the design of a successful asteroid sub-surface sampling mechanism, and in the interpretation of the fascinating geology on an asteroid. We have des...

متن کامل

Seed germination response of Haloxylon persicum (Chenopodiaceae) to different hydrothermal conditions and sand burial depths

Daily counts of germinated seeds of white saxaul (Haloxylon persicum) incubated at 35 different hydrothermal environments (10-25?C and 0 to -3 MPa) were carried out under controlled laboratory conditions. The seeds were then buried in sand at 4 different depths in well drained pots constantly moisturized for three weeks. In all these hydrothermal conditions, the courses of germination were comp...

متن کامل

Experimental study of applying colloidal nano Silica in improving sand-silt mixtures

Passive method is a new procedure in stabilizing loose soils. This methodology is a type of interlocking soil particles structures. In order to optimum improve in this method, it is necessary to achieve proper penetration length and increase the shear strength of parameters. Researches have shown an increased resistance to liquefaction and decreased permeability due to colloidal Nano silica inj...

متن کامل

Experimental study of applying colloidal nano Silica in improving sand-silt mixtures

Passive method is a new procedure in stabilizing loose soils. This methodology is a type of interlocking soil particles structures. In order to optimum improve in this method, it is necessary to achieve proper penetration length and increase the shear strength of parameters. Researches have shown an increased resistance to liquefaction and decreased permeability due to colloidal Nano silica inj...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2016