Analysis of Friction Noise and Vibration from the Cushion Frame of a Driver’s Seat in Passenger Cars
نویسندگان
چکیده
In this study, the vibration and noise for the cushion frame that directly contacts the driver of the car are investigated. The friction noise from the seat track generating the largest noise is measured and analyzed. Also, vibration measurement and analysis are performed in parallel to locate the position from where the noise is generated. In the next stage, the RPM of motor and the current changes during motor driving are measured. The vibration and noise generated during motor running are also measured and analyzed to examine the interaction between noise from the track and load on the motor. The vibration and noise analysis results are expressed using FFT analysis, octave analysis, spectrum contour map analysis, and sound visualization.
منابع مشابه
Vibration characteristics of tractor seat cushion materials
Operators of agricultural machinery are exposed to an extensive range of indirect vibrations through the seats, which gradually causes chronic damages. One of the ways to reduce the vibrations imposed on the operators is to use appropriate materials in tractor seat cushion. The present study was carried out in order to select appropriate foam or sponge and investigate different factors in reduc...
متن کاملConceptual Design of an Integrated Bus Passenger Seat
Travel by bus with long hours will create discomfort feeling for bus passenger. Long hour travel will create physiological stress and psychological stress on bus passenger. It may due to vibration, noise, as well as seat comfort. Seat comfort is a subjective feeling of bus passenger. In this research, air cushion was used to replace the part of the seat foam. During the development of the integ...
متن کاملComparative Research on Optimal Damping Matching of Seat System for an off-Highway Dump Truck
To protect the driver of off-highway dump trucks from the harmful vibration, this paper presents the comparison results to determine the optimal damping of the seat system by different optimization design plans. Three optimization schemes are considered including individually optimizing the damping of the cushion, individually optimizing the damping of the seat suspension, and integrately optim...
متن کاملA biomechanical modeling of an automotive passenger body to investigate the vertical vibration in various road profiles using transmissibility analysis
In the current paper, a biomechanical model of human body with unique structure is developed for evaluating the biodynamic responses, the vibration transmissibility and the transmitted accelerations to vertical vibration for the seated position with ignoring backrest support. In this regard, the 6-DoF Lumped-parameter model with six concentrated masses which are connected with linear springs an...
متن کاملStudy on the vertical vibration of an occupant - seat cushion system
Dynamic interaction between a human body and the seat cushion was addressed, aiming at seat design for better NVH performance of a passenger vehicle. Referring to DIN EN ISO 3386-1 and previously researches, static and dynamic tests were conducted on polyurethane foams typically used as vehicle seat cushions. A one-dimensional stress strain relation was derived based on the measured data, in wh...
متن کامل