EUROPEAN ORGANIZATION FOR NUCLEAR RESEARCH PS/AE Note 2001–001 CERN-NUFACT Note 061 Transfer Line Between the Proton Driver Accumulator and Compressor Rings for the CERN Neutrino Factory
نویسندگان
چکیده
This note presents a possible design for the transfer line between the proton driver accumulator and compressor rings of the CERN Neutrino Factory. Based on the layout of the two rings presented in Ref. [1], a possible configuration for the transfer line is studied. The geometry and the optics of such a transport system are discussed in details.
منابع مشابه
EUROPEAN ORGANIZATION FOR NUCLEAR RESEARCH PS/AE Note 2001–006 CERN-NUFACT Note 075 A Layout for a Muon Cooling Experiment at the CERN-PS: The Primary Proton Beam
One of the key component of the Neutrino Factory under study at CERN is the muon cooling channel based on ionization cooling. To explore the parameter-space and the efficiency of the design proposed at CERN, a muon cooling experiment. This note reports a possible layout of a transfer line delivering a primary proton beam onto a target to generate the muon beam. The details of the new transfer l...
متن کاملEUROPEAN ORGANIZATION FOR NUCLEAR RESEARCH PS/AE Note 2001–002 CERN-NUFACT Note 069 Varying the Path Length of Charged Particles Using Wiggler Modules
In this paper, different versions of optical modules based on alternation of positive and negative curvature magnets, called wigglers in analogy with the devices used in electron machines, are presented. A careful analysis of their properties is carried out. For each module, a set of free parameters is given and the sign of the momentum compaction is discussed for various regions of the paramet...
متن کاملEUROPEAN ORGANIZATION FOR NUCLEAR RESEARCH CERN–PS/2000–011 (AE) June 15, 2000 DESIGN OF A 2.2 GEV ACCUMULATOR AND COMPRESSOR FOR A NEUTRINO FACTORY
The proton driver for a neutrino factory must provide megawatts of beam power at a few GeV, with nanosecond long bunches each containing more than 1×1012 protons. Such beam powers are within reach of a high-energy linac, but the required time structure cannot be provided without accumulation and compression. The option of a linac-based 2.2 GeV proton driver has been studied at CERN, taking into...
متن کاملEUROPEAN ORGANISATION FOR NUCLEAR RESEARCH CERN - PS DIVISION CERN/PS 2001-007 (RF) CERN-NUFACT-Note 074 CURRENT ACTIVITIES FOR A NEUTRINO FACTORY AT CERN
Development is necessary in a large number of technologies before a Neutrino Factory complex can be built. In the case of the CERN project [1, 2, 3], with the help of other laboratories, work is progressing on the systems incorporated in the reference scheme. The subjects under investigation, the status of the studies and the trends of evolution of the scheme are described. HEACC'2001, 26-30 Ma...
متن کاملEuropean Organization for Nuclear Research Cern - Ps Division Cern/ps 2002-033 (ae) Lattice Design Studies for the Cern Proton Driver Accumulator and Compressor
The CERN baseline scenario for a Neutrino Factory comprises accumulation and compression of the beam delivered by a 2.2 GeV kinetic energy H− linac, to provide the time structure needed on the target. Originally, accumulation and bunch compression in one single ring was envisaged. To limit the RF voltage necessary for bunch rotation, quasi-isochronous lattices were studied. The low transition e...
متن کامل