Accelerated oxygen exchange kinetics on Nd2NiO(4+δ) thin films with tensile strain along c-axis.

نویسندگان

  • Nikolai Tsvetkov
  • Qiyang Lu
  • Yan Chen
  • Bilge Yildiz
چکیده

The influence of the lattice strain on the kinetics of the oxygen reduction reaction (ORR) was investigated at the surface of Nd2NiO4+δ (NNO). Nanoscale dense NNO thin films with tensile, compressive and no strain along the c-axis were fabricated by pulsed laser deposition on single-crystalline Y0.08Zr0.92O2 substrates. The ORR kinetics on the NNO thin film cathodes was investigated by electrochemical impedance spectroscopy at 360-420 °C in air. The oxygen exchange kinetics on the NNO films with tensile strain along the c-axis was found to be 2-10 times faster than that on the films with compressive strain along the c-axis. A larger concentration of oxygen interstitials (δ) is found in the tensile NNO films compared to the films with no strain or compressive strain, deduced from the measured chemical capacitance. This is consistent with the increase in the distance between the NdO rock-salt layers observed by transmission electron microscopy. The surface structure of the nonstrained and tensile strained films remained stable upon annealing in air at 500 °C, while a significant morphology change accompanied by the enrichment of Nd was found at the surface of the films with compressive strain. The faster ORR kinetics on the tensile strained NNO films was attributed to the ability of these films to incorporate oxygen interstitials more easily, and to the better stability of the surface chemistry in comparison to the nonstrained or compressively strained films.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Surface Chemistry and Non-Stoichiometry of Nd2NiO4+δ Epitaxial Thin Films with Different Orientation and Strain

The influence of lattice strain on non-stoichiometry and surface chemical composition was investigated for epitaxial Nd2NiO4+δ (NNO) films during annealing in ultra high vacuum (below 10 mbar) and temperatures of up to 700C. (100)and (001)-oriented films with tensile and compressive lattice strain along c-axis were fabricated using pulsed laser deposition method. A significant decrease in the c...

متن کامل

Tensile Lattice Strain Accelerates Oxygen Surface Exchange and Diffusion in La1–xSrxCoO3−δ Thin Films

The influence of lattice strain on the oxygen exchange kinetics and diffusion in oxides was investigated on (100) epitaxial La1-xSrxCoO3-δ (LSC) thin films grown by pulsed laser deposition. Planar tensile and compressively strained LSC films were obtained on single-crystalline SrTiO3 and LaAlO3. 18O isotope exchange depth profiling with ToF-SIMS was employed to simultaneously measure the tracer...

متن کامل

Anisotropic Strain Induced Directional Metallicity in Highly Epitaxial LaBaCo2O5.5+δ Thin Films on (110) NdGaO3

Highly directional-dependent metal-insulator transition is observed in epitaxial double perovskite LaBaCo2O5.5+δ films. The film exhibit metallic along [100], but remain semiconducting along [010] under application of a magnetic field parallel to the surface of the film. The physical origin for the properties is identified as in-plane tensile strain arising from oxygen vacancies. First-principl...

متن کامل

تأثیر فشار اکسیژن بر ساختار، هدایت الکتریکی و نفوذپذیری اکسیژن لایه های نازک Ba0/5Sr0/5Co0/8Fe0/2O3-δ ساخته شده با لایه نشانی لیزر پالسی

 In this paper, Ba0.5Sr0.5Co0.8Fe0.2O3-δ (BSCF) thin films were deposited on single crystal SrTiO3 (STO) (100) by pulsed laser deposition (PLD) technique at different pressures of oxygen. Crystal structure of bulk and thin film samples was studied by x-ray diffraction (XRD). The XRD results indicate that both bulk and thin film samples have cubic structures. AFM micrographs showed an increase i...

متن کامل

Nano-structural Characterization of Post-annealed ZnO Thin Films by X-ray Diffraction and Field Emission Scanning Electron Microscopy

ZnO thin films were deposited on Si(400) substrates by e-beam evaporation technique, and then post-annealed at different annealing temperatures (200-800°C). Dependence of the crystallographic structure, nano-strain, chemical composition and surface physical Morphology of these layers on annealing temperature were studied. The crystallographic structure of films was studied using X-Ray Diffracti...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • ACS nano

دوره 9 2  شماره 

صفحات  -

تاریخ انتشار 2015